• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Best Way To ID Unknown Prop Shafts?

    Front shaft info: 12k front 19 1/8 " between arrows. 10K A0/A1 front 18 7/16 ". Yoke end : A2 /A1 is 3 7/8 " A0 is 3 1/2 " between arrows.
  2. 86humv

    Best Way To ID Unknown Prop Shafts?

    Mid shaft : 12447114 is 33 5/8 " between arrows....only for 12k trucks The 10k trucks are 31 3/4 " between arrows. Early 10k is 31 9/16 " A2 Rear shaft 12447113 is : 33 " with 1330 yoke A0 rear with 3L80 / 242 : 34 7/8 " A2 rear 12k : 33 " with 1350 yoke. Yoke ends : 10k Mid is: 3 7/8 " Early...
  3. 86humv

    Laminate vs. Basic vs. Supplemental Armor Windsheild Glass

    Thin is about 3/8th...... .350 " Thick is 5/8th. Same as side glass. All have the plastic on the inside.
  4. 86humv

    Found a broken bolt under the HMMWV please help me ID where it cam from

    Thats the new style HD one, much better than the thin one, but the thin one is better than nothing. It mounts to the motor mount cast bracket.
  5. 86humv

    Need help finding a pulley for my 200amp alternator

    Works now...PM sent
  6. 86humv

    Need help finding a pulley for my 200amp alternator

    Tried to send a pm again at 11:18 pm pacific....no go.
  7. 86humv

    Moisture in gauges

    Those look like Clark brand. Maybe the Faria are better.
  8. 86humv

    aftermarket Speedo

    T/C gear is orange 35 teeth for 2.56 diff's, red 36 teeth for 2.73, and red and 40 or more teeth for 3.08's.
  9. 86humv

    Need help finding a pulley for my 200amp alternator

    Your PM is full...won't accept anymore.
  10. 86humv

    Need help finding a pulley for my 200amp alternator

    Good ones Used take offs with nut assy. Diff. in a late to early surp pulley....gold is early.
  11. 86humv

    Need help finding a pulley for my 200amp alternator

    Thats the later surp system pulley. Its the clutch type. I may have some.
  12. 86humv

    Air Filter Restriction Gauge Bulb

    Air filter gages don't have lights on Hmmwv's, but bigger trucks do.....I have a few available.
  13. 86humv

    Civi-4l80 swap T-case question

    You also need a different X member, and T/C adapter. I civi T/C might not have the proper angle when bolted up, or may not fit a T/C adapter for one a military T/C 242. 218 does not have a slip yoke like both types of 242's which is a better way to go.
  14. 86humv

    Warn winch 12k m998 front install parts

    If its a true hmmwv 12k winch....not from an Mrap: See fig. 148 #8 Fig. 253 for parts needed. TM9-2320-387-24p
  15. 86humv

    What have you done to your HMMWV today/lately

    The 2 small hoses normally route over the intake duct so the don't have that sharp bend.
  16. 86humv

    My M998 Arrived Today (could questions)

    Tire pressure : 12 to 40 per load in the -10 [ radials ]
  17. 86humv

    Hmmwv LED light question????

    28vdc is fine as the system is around 27.5 vdc when running.
  18. 86humv

    Has anyone stripped a hmmwv body?

    Later on you might say....What was I thinking ?
  19. 86humv

    6.2 to GEP 6.5 swap

    And the water pump backing plate. Don't put that used WP from the 6.2 on there...get a new one. Don't reuse your head bolts
  20. 86humv

    Replacement Covers for high back seats?

    Nylon cordura is whats on most seats now. Awile back it was canvas.....old stinky canvas.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks