• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    AC compressor belt configuration

    If its a redot pump with V belt....you need a new 5 groove pully for the water pump. Its not in the standard TM.
  2. 86humv

    HMMV conversion/ customization cheap!

    " They" should add a Hmmwv hot rodding and modification post like Cucv, and Deuce have for all the Non military things these guys are doing to these former Military trucks.
  3. 86humv

    3Jacks HMMWV build

    Hey...no front seat mount....you gonna put a milk bottle box in as a seat :grin:
  4. 86humv

    Humvee ownership, day two. Power steering blew a gasket, I think.

    I just replaced the whole thing....that way you can change your pitman arm the same time....but if your looks real good and comes off easy...re-use it. Yours looks like its been replaced. [ pitman arm ]
  5. 86humv

    HMMWV Battery Polarity Keeps Reversing?

    Sock comes off with a twist...with pliers....then twist on a new one. I'll see If I have senders.
  6. 86humv

    Has anyone converted a 6.2 into a turbo charged unit?

    The intake bolt holes for turbo heads are at a different angle than 6.2, 6.5 NA heads Hummer/hmmwv / GM Van 6.5 turbo intake bolt angle : 60 deg.
  7. 86humv

    np242 drive shaft help needed.

    If it is different, then its for the 4L80e....and those are available cheap all over.
  8. 86humv

    np242 drive shaft help needed.

    The mount between the 218 and 3l80 is the one you use, as it lines up to your X member.
  9. 86humv

    replacing center vent panel over dog house panel

    Slide it in from the right side.
  10. 86humv

    Mile Marker Winch Brackets Help

    You might have a rear winch on a front plate. Looks like one beltfed34 sold on fleebay. Others on google search show more holes.
  11. 86humv

    Post removal ?

    Earlier I was looking at a post in the Wanted section about 1" towbar feet.....Its gone ? What happened.....someone didn't like something on there ?
  12. 86humv

    np242 drive shaft help needed.

    I have 2 ea. new... 12342618..Mid shaft to T/C 242 919588-2403...rear, T/C242 to diff with 1330 yoke. Straps for T/C 242 And I have the T/C lever.
  13. 86humv

    np242 drive shaft help needed.

    I wanted to know what yokes were on the front and rear diff., and match therm with my photo's...then I can tell you what you need. I probably have all them available.
  14. 86humv

    np242 drive shaft help needed.

    Is your rear yoke like one of these : And...is your front diff yoke like one of these :
  15. 86humv

    TM question on Heater assembly

    TM9-2320-280-20-3 section : 10-137 and on
  16. 86humv

    np242 drive shaft help needed.

    3 or 4 bolt tail shaft housing ?
  17. 86humv

    Front suspension sag, 10k half shafts

    I might have some new -2 springs coming in.
  18. 86humv

    Transfer case broken

    I might have the drive shaft you need if you get a 242 T/C.
  19. 86humv

    Transfer case broken

    Thats is a good ol 218 T/C....get rid of it. Replace it with a 242 T/C. 242's are slip yoke type, so you'll have to replace 2 drive shafts.
  20. 86humv

    M998 rear bumper with tire options

    That one has no angle clamp brackets.
110,897members
165,315threads
2,326,252posts
1,286online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks