Search results

What's bad is the transmission doesn't need rebuilding Come on down I will feed and house you well! sent from my decrepit fingers

I found the Goodyear hose was cheaper at my hydraulic shop. Next thing I have been literally giving to guys that have come by is called Grime Boss hand wipes. They are awesome they will remove the smell of diesel fuel and axle grease, they have removed everything I have gotten on my hands! From...

Yeah we checked that too. Looks like we are pulling the transmission. sent from my decrepit fingers

Ok been through a rough spot lately but getting there. 74M35A2 is sending me his A/C compressor mount also so shortly I should have a fully 74M35A2 accessorized truck! sent from my decrepit fingers

Dragging this back to life. So a couple more questions if you want to run wet hubs instead of packing with grease can't you just leave out a inner seal? I understand why the military ran packed hubs to help stop water intrusion, but on a hwy truck the oil bath is better, don't want opinions on...

Did it fit? sent from my decrepit fingers

Have mine out and will be assembled shortly sent from my decrepit fingers

Do this and you will never have a vehicle without air ride again. I actually would just add the bags you won't believe how much difference it will make, then you will do the rear. sent from my decrepit fingers

I agree with 74M35A2 about the gelling additives, but I do like to run a quart of 2 stroke in mine all it adds is lubrication and is made to be burned, and the tank before I change the filters I add a gallon or two of good biodiesel it also lubricates and it will clean the inside of your system...

Okay found a little more about this fuel, it is call CIE or CITE which stands for compression ignition and turbine engine. The standard seems to have been canceled in 1970 , but reading through some of the references I found indicate it as a all temperature fuel. So maybe a early JP-4? sent...

I don't mind being called out for trying to protect a few lives. If one of these 450-800 lbs wheels takes off on its own it can do tremendous damage. I will say I lost a 11.00 r 20 and got lucky, it didn't damage anything, and I had proper lug nuts on it. Try to do the best you can to have a...

So here is my question what setup would be best for 375-425 range? Ppump with 420 injection and hx 50 and intercooler? Or push the mwpump? Looking for typical over the road use not race use. sent from my decrepit fingers

Guys as a LEO I would recommend the following in any state. If you are pulled over be nice, if he or she wants to write you a ticket for something you are legal for in your state ask nicely if you can show them your copy of the law of your state saying you can do it legally and a copy of the...

No if it is rattling it needs to be fixed. Not aimed at just sed6 these trucks are 30 years old if it rattles it needs to be fixed, not just let it slide, I also am guilty of this many times and it creeps up and bites me in the butt. sent from my decrepit fingers

Try this one TM 55-2320-272-14-1 TRANSPORTABILITY GUIDANCE TRUCKS, 5-TON, 6X6, M939-SERIES/M939A SERIES sent from my decrepit fingers

So are you doing a futon style bed that folds along the length? How about a sketch of the floor plan so us feeble minded can get an idea of how you are doing it. sent from my decrepit fingers

This thread is not about CDL and all states have a reciprocity agreement that they honor your home state laws. sent from my decrepit fingers

Naw simp that was not a RSMS rebuild sent from my decrepit fingers

That's the one I was trying to come up with! sent from my decrepit fingers

RSMS rebuilt trucks are built better than new in some ways, there were 5 through out the country, one in Kansas and one in Camp Shelby, Mississippi the others I forgot, but most of the workers were a mix of Veterans and national guard technicians. They take the vehicle's down to the frame and...