• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M35A2-AZ

    Stuck in LA, 939 Locked in 6-wheel Drive - Ideas?

    Just to get it home. I would pull the air line form the transfer case air solenoid or on the switch under the dash. Or pull front drive shaft.
  2. M35A2-AZ

    Fuel pick up tube

    Replace it, But you will have to put the pickup tube on the inside of it. Not sure if the A2's are the same as the A1"s, But the pickup tube is soldered to the 90 degree part on the inside of the tank.
  3. M35A2-AZ

    M923A2 Solargizer hook up to 4x 6TMF

    All the trucks I have seen with Solargizers have two.
  4. M35A2-AZ

    M923A2 Solargizer hook up to 4x 6TMF

    Most of the time with 4 batteries you need two Solargizer, one on each 24v set.
  5. M35A2-AZ

    Drop Side Bed Front/Side Rack length

    I have some old wood ones that I took off to replace if you need one as a pattern.
  6. M35A2-AZ

    M923A2 rear axle oil seal part number

    If your getting air out when you remove the vent, it is not working right. I would replace them out a a central vent system ti all the axles. Here is a thread about them. http://www.steelsoldiers.com/showthread.php?125848-Leaky-wheel-seals-caused-by-axle-vents&highlight=vents
  7. M35A2-AZ

    M923 air conditioning a/c install project

    Way to go!!! I have my system about done just waiting on a new fitting and some new o-rings for the hoses.
  8. M35A2-AZ

    How much general maintenance required for 923?

    There is always something to do on them. Front boots, seals, oil changes, tires, etc. But it is all fun...
  9. M35A2-AZ

    Speedometer drive cable fix/ replacement m925a2?

    Yes I would get the complete cable assy and replace it. Just a new core cable may not fit the other casing.
  10. M35A2-AZ

    What to look for in a salvage yard but not want to find

    Here in AZ I am always looking for them. I know they are there someplace, Do not put yours hands and feet were you can not see. Do not go out at night without a light.
  11. M35A2-AZ

    M 936 Hydraulic temperature sensor?

    I have not seen that before on any of the M936's that I have seen.
  12. M35A2-AZ

    Cab reinforcement plate

    The little flat plate gets welded to the back of the cab at the top on the right side.
  13. M35A2-AZ

    M923 air conditioning a/c install project

    Thank you, yes it needs to get back to his AC install.
  14. M35A2-AZ

    New Owner 923A1!!!

    Welcome and it looks like a nice truck and glad you made it home safe. Do you need a soft top and frame for the cab? Pm me if your interested.
  15. M35A2-AZ

    M923A2 Torsion/Torque Rod Assembly With Ends-Rubber seperated.

    Yes you press out the old ring and press the new end in. May put it in the freezer for some time and it should press in easier.
  16. M35A2-AZ

    M923A2 Torsion/Torque Rod Assembly With Ends-Rubber seperated.

    I would get the new ends and press them in.
  17. M35A2-AZ

    M923 air conditioning a/c install project

    Looking good!!!! I am slowly working on getting my system installed.
  18. M35A2-AZ

    M923 air conditioning a/c install project

    AZ Mitch, Thanks for the offer, I may take you up on it when I get to that point. Thanks!!
  19. M35A2-AZ

    Removing PTO off of M939A2 series trucks, any trick to it?

    On the A2's there is one mounting bolt inside the pto.
  20. M35A2-AZ

    M923 air conditioning a/c install project

    AZ Mitch, Thanks for the reply. After I get my sytsem installed I will need to find someone that can pump it down for me and get it working.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks