Search results

Thank you, I ordered a couple of each 1A-3A, should have it fixed in a couple of days.

Did anyone find a source for these? The diode inside is fried causing pass through voltage energizing the compressor pulley all the time even with the a/c off. The actual relay itself looks fine.

I placed an order Saturday and I received an email that my order was shipped today, always have received quick service from them.

I'm not jumping on the bypass wagon. By bypassing to 12v you are doubling the current drawn on the 12v supply wire and I'm not sure it's rated for that. You are also pulling a large amount of current from the front battery which will over time weaken it. Regular glow plug maintainance will...

Thanks, PM sent.

I was there Tuesday morning picking up my M1010, must have missed you. I only had a 90 mile trip home. Let me know if I can help.

I thought you might enjoy seeing my toasty glowplug control card, it looks like a burnt waffle. When I picked up my M1010 this week I had no wait light or glowplug action, after I got it home further inspection found this. The mechanic at the site said last time he moved it after he "jumped"...

Check to make sure the cold start solenoid is working. Sometimes the temp sensor for it goes bad and makes for hard cold starting.

Nice rig, just bought one myself, must be open season on M1010's.

I had one of the range boosters it's about 30watts output. Mine had a 24vdc connection on the back instead of a battery box. You use a short jumper cable with bnc connections on both ends, connect the radio "ANT" to the booster "IN" and then hook your antenna to the booster "OUT" or thread a...

It will only go on one way, some times it takes a bit to get it to bleed out the air. I have done several and some take longer than others.

Thanks, I think we would all like to see some pictures of the gensets providing mining power once you get them going. Good luck.

Two things, are you near the area the "Jungle Gold" show is filming where all the armed chineese are taking over claims? and as per GL rules did you have to get export permits to ship military equipment out of the US or are gen sets no longer requiring EUC's? Good luck and hope they work for...

You may loose some power but as long as the trailer has surge brakes you should be fine.

It had a regular v belt, sounds like a bad gasket. Thanks, now the work begins.

My 86 M1009 snapped the crank a while back so I purchased a 1993 GMC mini bus with a 6.2 showing 92k mies. I drove it down the road a couple of miles and it ran well. So a year later I transplanted the bus engine and now have a question concerning the cooling system. I had the radiator shop...

Yup, been there, cool stuff, it's right at the end of I395 in Bangor.

I sold the used one I had with hardware/bracket, new style to a member here for $35.

Should cover 30-88MHz

Welcome to the contact club, looks great.