Search results

So I got the kit the other day and it came with instructions for a two piece tie rod. Skyjacker confirmed that I have the right kit. I replace the factory shock with the skyjacker shock. I cant figuer out where/how the second shock mounts to the housing/ tie rod. Skyjacker said it goes on...

So the other day I decided to due some easy preventive maintenance and swapped the radiator. While taking of the oil cooler lines off the radiator, one of the hard lines crumbled. A hour job turned into a day project. To get the truck running until the replacement hard line arrived, I used...

Waiting on EUC so approximately 30-45 days out. There are 5 containers. Each container is the size of a pallet and weighs 700-800lb (Motor). They have holes on the bottom for a pallet jack. THX

Thanks, I just need to find a carrier to pick them up and move them to Reno.

Trying to get five palletized engine containers to sparks NV. Any ideas would help. ThX

Sombody has to have one or a dozen.

I just won several 6.2's in TX and I need to know the auctual deminsions of the crate ofr shipping (I dont not trust GL). Does it have pallet holes so it can be moved with a pallet jack. Detailed pics of the crate would be appricated. Thanks in advance

I just got billed $60 for the SF. The DMV up here would not even look at the paperwork without the 97. GL doinig anything to make money these days.

I have a extra rebuild kit from MBM for the K30. I think I paid $50+shipping for it. Make me an offer if anybody needs it. I will also post in the classified section http://www.mbmbrakeboosters.com/Images/web-catalog/pages/kit50.htm

I went to the DMV today to register two M1030B1 and they said I have to have a 97 or a insurance bond to register them. So now I filled out a GL request for the 97 and agreed to pay $60. My question is, even though the auction description stated "no 97 or docs will be given" will they give me...

Only the M1028A1 has the 205 according to the TM. I wish my M1028 had the 205.

36 swampers 4inch lift in the front

This has been addressed several of times. You have the same problem most of us have had. DO a search for m1010 or leece. I use a modern 100 amp battery equalizer and every problem went away. It makes sure the batteries are balanced . The old DUVAC was not designed right and that is why most...

I remember somebody selling the M1031 utility bed (maybe called a M887)on ebay not to long ago and it didnt even sell. I think it was around 400 or so. I am looking for one. Who makes the bed and where can I fond one? Thanks

Does anyone have a radio mount in their pickup? Either the one that goes over the 4x4 shifter or on the passengerside floorboard. I am looking to buy one if anybody has a spare. Pics would be great of your pickup setup. Thanks

RE: Re: Two engine questions (mystery engine electrical pigt WOW that was easy. I had my mind so set on finding the other half of the electrical connector over looking the hidden temputure sensor. Thanks CUCVFAN

Well, I spent all day tying up some loose ends on the engine swap. I noticed that where the green glow plug wires on the passenger side come out of the loom (under fuel filter), there are two wires (org/black and grn) also coming out and into a female wire connector (cant find in TM). What...

That seems like a lot for a recore. Kragen sells them new starting around 350. The older ones are build out of better materials. I am wondering if the performance will be better getting a good recore than one of the new ones?

Looks like the head gasket. The pistons look fine. My radiator is gunked up and the root of my problems. What did you pay to get it recored?

They are 36/12.50/16.5 SUper Swampers with a little front fender bashing.