Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Double check the PCB ground. It finds ground through the lower outside corner stud. If the paint is not clean off of all four surfaces ( the spacer, the box and the truck ) it will cause problems.
Took a ride out to Doghead's for a little shakedown. About 55 miles each way. No problems ran perfect. Very happy. Even got DH to drive me around Lake Ontario for a while. All in all a very good day. Also thanks to DH I have the new air pressure gauge I needed.
Now that I have run it, I had a problem with the 150 psi safety valve popping off, but the gauge only indicating 70 psi. Seemed like an easy fix, the safety valve must be bad. I had another one so I swapped it out quick, and......that wasn't it.
So I picked up a new air governor, that was the...
By them giving "a little" to the Fire Dept this will eliminate the biggest ally that the collector hobby would have had. Once they are made happy that whole argument gets removed. Giving a little with no title transfer is about the worst possible update that us collectors and hobbyists could...
It's really pretty easy. There is a thread about mis plumbed lines at the block where three air lines come together. My truck was plumbed wrong and it was a 10 minute fix. Hard to see. Use your phone to take a picture of the face of the block so you can see which is "a" "b" and "c". Then just...
I went and checked mine, and they are there, but mounted like the two in G's example mashed together: Mounted touching like pic #1, but on the other side like pic #2. Hmmmmmm
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!