Search results

While I don't have a CUCV, I did have an "85 K30. I used blue tape and drew out the shape I wanted removed and used a saws all.

OK, I don't wana be a deek, I am a shooter too, but, no more weapon talk please. I will kill the thread.

Looks like a good fit, just take it easy on the live weapons discussions/pics. That's worse than politics here. :roll:

Very clean and out of the way! Unless you get folding steps, then the drivers side might have a clearance issue. By the looks of that beast, you might want to look into them!

My passenger side did it again. The mechanism is a ChiCom replacement from AVTE or Saturn. Try and fix yours 'cause the replacement items go away fast.

TM 9-2320-361-20 Try this, pics to help you too. Search is your friend! http://www.steelsoldiers.com/deuce/12636-how-fix-inop-outside-door-handles.html

And BTW, We DO have a TM section here again...if that will help you out. Good luck, keep us posted.

The banjo fitting gaskets. Eriks Surplus in San Diego has 'em. A hub nut socket. brake clean, grease, beer :beer:, friends...it's always more fun with others around!

Get a second opinion.

Or too little throttle leakage. If you can't tell if the jakes are killing it, for a test, disconnect the throttle switch. If it still dies, turn the manual override in, then check it again. if it still does it, pay attention, if the RPM dips more than around 50 or so, it can have too much...

Just messin'. Whatever blows your skirt up. To me, bobbers are like lite mayo, sugar free cookies, tofu, fake bacon and silicone boobies. They aint real deuces, maybe buck and a quarters. Again, sorry, but not! :driver:

I think the real question is if bobbed deuces are necessary! :confused: Sorry....nah, not really :beer:

I think the real question is if bobbed deuces are necessary! :confused: Sorry....nah, not really :beer:

Yup, save your money on repairing the sprag case. You are better off replacing the unit. 2cents

That would be ANY inline 6.

:ditto: on what Kenny says. I've done a couple and used this method. It's much safer than trying to balance the pig on a jack. I use a 1 1/2 x 4 steel channel with a 600 lb capacity CM chain hoist. Take the passenger seat out as well as the dog houses, sling it from a beam across the doors and...

Send it to patracy and see if he can put it up in the TM section.

Just keep this in mind, If you choose to contact the local power company, they will most likely want to see the set up. You will need to have it inspected by your local inspectors and the power company. They MIGHT not let you use an older gen set due to emissions..both noise and exhaust...

Looks cool! Gimpy, wadda you think :razz: ?

I believe what area52 said is correct. The archives were brought back a couple of timews and there were issues on the new site after that.