• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. I

    Connecting MEP to house

    Regarding transfer switches vs interlock kits while both are legal in most areas it comes down to one detail: Interlock kits make sure the breaker switches are in "safe" positions before switching power sources, but do nothing to make sure the contacts are in a safe position. In other words it...
  2. I

    To bid or to buy, that is the genset question.

    I live about 45 - 50 miles NW of Elton, the electrical stuff is usually not too bad, most often it is the same sort of things as you likely get into with your lighting, bad grounds, broken connections, bad meters, that sort of thing. If you can use a multimeter to test for volts...
  3. I

    Another 002a recovery

    Don't feel too bad, the one I feel somewhat sorry for was the new 3 kwMEP-016d owner from last week at Ft. Polk where the GL description read 5KW MEP-002a, ended up selling for around $800.
  4. I

    To bid or to buy, that is the genset question.

    One more thought after reading the survival blog entry: Surplus auction generators are NOT for everyone, but if you are reasonably mechanically inclined (can change a fuel pump, or a starter, can read and follow directions for testing procedures, etc.) chances are good that you can buy one and...
  5. I

    To bid or to buy, that is the genset question.

    There are no more EUC's on generators as of some time last year. As to the points at hand I have now bought 6 generators from GL some MEP's some Civilian standby units, 2 of them ran with only fluids, filters, and batteries, but even these had minor issues (like bad/wrong hour meter, pin hole...
  6. I

    mep-005 1987 won't stay running

    The "coffee grounds" are caused by the fly weight retaining ring inside the injection pump coming apart. You need to have the pump rebuilt or at a minimum have the flyweight retaining ring replaced. Ike p.s. note stanadyne pumps build after the mid 1980's use an improved rubber compound for...
  7. I

    Mep-002 new owner

    I can't say anything good about Wal-Mart batteries, other than they will cover them under warranty, when I bought my Ford F-250 used in July of 2008 it came with a pair of then brand new Walmart yellow Everstart MAXX group 65 batteries with 36 month full replacement warranty (either 5 or 7 year...
  8. I

    Mep-002 new owner

    The inline wired part on the fuel pump that often stops working is a filter capacitor and can be removed. Facet sells this model line both with and without filter capacitors. Ike
  9. I

    Mep-002 new owner

    The voltage you see will depend on how drained your batteries are, etc. The simplest test to see if it is charging at all vs not is check battery voltage with it running, then turn it off. If voltage is lower with it off then it is charging, at least partially. If voltage ever goes over about...
  10. I

    MEP-002a wiring sizing question

    Without saying if it is safe, or not, a couple of things to keep in mind when it comes to the NEC ratings, 1, Flexible extension cords are rated lower than other equal size cords in amps because of an expectation of abuse, so it is assumed a certain percentage of the strands in the wires will...
  11. I

    Mep-002 new owner

    Ouch, that is going to hurt when you find the price on replacement good throttle cables. On a side note it is good I did not end up offering to pick it up for you, my truck broke down on the way home from the airport in Alexandria this afternoon (was able to limp it into the dealership in...
  12. I

    MEP-002/ 003 genset filters available

    One other potential source, check Amazon, they have the purolator air,oil, and fuel filters, and do free supper saver shipping on orders over $25. Ike
  13. I

    is a mep-002 enough to start a/c

    Most likely it depends on what type of compressor is in the unit, if it is a scroll compressor (very common on newer air conditioner units) it will have lower LRA and therefore lower starting inrush, compared with traditional piston style hermetics. Scroll compressors started showing up in...
  14. I

    is a mep-002 enough to start a/c

    Only way to know is to try it, LRA and RLA are often worst case, you could try putting a good clamp meter on it and measure running load and inrush current. Ike p.s. how old is the air conditioner unit?
  15. I

    Need Advice on 3kw Regulator Drift

    I too have a Chinese 460 clone that I have ready in place to drop into my 701a if the regulator in it fails before I get around to trouble shooting the thermal / volt drift problem. For $60 or so I find it is worth it to have on hand, a number of people have used them on MEP-016 and MEP-017...
  16. I

    looking for a surplus gen set parts dealer

    If you need a source for Allis Chalmers parts try illiniparts.com they are very helpful, certainly worth a phone call if you need something, they have a lot of stuff that is not listed online. Ike
  17. I

    Source for Mep-016E fuel filter

    I don't know if they are the same, but suspect they are. If it is then it is a bit of an oddball filter, and over the years there have been multiple contractors for it, I bought some off ebay a couple of years ago, and if memory serves they were made by Davco. I will get back to you on part...
  18. I

    looking for a surplus gen set parts dealer

    Try Delks, Saturn Surplus and maybe Tom at Gulf coast military truck parts I have never heard of this model though, and the military was known to buy short runs of some odd custom models prior to the MEP generator standardization program that started in the mid 1960's. Can you tell us more...
  19. I

    Price Help Mep-018a

    It would be possible, I would certainly try to confirm that it really is a 60 hz unit by putting a good meter on it while running. People have been known to try to pass off 400 hz paper weights as 60hz generators by removing the 400 hz meter on the panel and replacing it with a 60 hz meter...
  20. I

    mep016d new owner

    Just wait until you buy two at once
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks