Search results

Yes they were given permission to go down on the starting bids on some items.

Rkrug buy two of the jump boxes and you should have no problems I have used two regular jump boxes to fire off not one but two 818s in 6° weather so I would say maybe with one but sure with two but why? Just get two big Truck batteries for 100 apiece and save time and money. :driver:

Try getting a wrecker policy :evil::cookoo:

Nope only thing under the box is hoses and valves the motor for the rear winch is where the pto shaft used to go, hooked to the chain drive. All of the winches are the same as the older ones just driven by a hydro motor instead of a pto shaft.

Yeah gimp the arm will rotate on the dual wheeled trucks but not the single wheeled a1 or a2

Mark what I had to do was take pictures of my wrecker sale from GL and my wrecker by to show I was indeed the owner of the bottles, then it was okay no problem.

Graphite lube or run a pencil across the key and leave the dust on the key when you put it in the lock.

Here's mine

Okay I went and took pictures of some of my tanks, here for your viewing pleasure.

Yes! I have at least one! :driver:

nopics I really want to see this mount I thought it just sat on the shelf.

Okay the oxygen bottle is a standard size you can buy and the same size on all of the wreckers that I have seen, the acetylene bottles that fit the mounts are a standard size that you may or may not can get,some places will sell them, but the government used different height bottles some are so...

Just found out the amsteel blue cable is 350.00 so I think I am going to try it when I get a wrecker back up and going.

Okay I feel I need to put in my two cents as I may have driven more tractor miles in different MV tractors than anybody here, to back that I have been in them since before I could walk and started driving them about eight so about 35 years behind the wheel and probably over 1500 different MV...

That's true DH and Ron but I would Not have ever learned that some of the older five tons had a transfer switch setup instead of a tank switch valve setup. Everyday that I learn something new to me is a good day.

Been looking into replacing mine with synthetic wire rope if me and the engineer for the company that makes the termination fittings can figure out how to make it work. :grd:

Okay but that's not all of them right? :whistle:

Keep your coe truck and get a 931 or 932 and put the coe cab on it that will give you the air and room and you might want to use the engine out of your old truck too according to what it is.

Kenny try loosening the other set of bolts on the hardtop also, there's a lot of adjustment to get by loosening everything and then lining it all up, I have used some of the big ratchet straps to pull it all straight then lock it down not fun in the summer because somebody has to stay inside to...

SE JONES give me a call and next time I run to the coast I can show you a lot of stuff to work on if you want to play in the tidal surge there will always be folks to save down here from the storms.aua