Search results

This is a single hole injector. I do have some 2-hole take-offs, but no extra single hole ones....

Man! That's unusual...singe or two-hole injector (-1A or -1 engine)?

Good thread. This is a test procedure for the torque rods published in the PS magazine twenty plus years ago... For full resolution, right click on image and "Open link in new window".

Thanks Eric, I'll check with my local NAPA. The original was destroyed when I removed it....

Fair question, it's 2.025 Image shows what it should look like when finished. Edit: Added image.

Is this location of the VIN universal for all MVs? Is it spelled out in any TM? Just curious.....

What is the proper clearance for a freeze plug or cap in this case, before wacking it with a hammer? I need a solid fit and the cap will be drilled and tapped for a vent after installation. The 2-1/16 cap is too large, so I'll have to grind it down to fit. The next smaller size cap that I can...

Welcome to the site to the both of you! "Where do you source your bits from?", love that expression, you just can't say that with an American accent. :-)

The basis for a thermocouple is to measure the voltage that develops between two dissimilar metals and the metals (wires) have to be the same all the way to the gauge. If there are additional metal to metal junctions along the way, there may be errors introduced. A connector or plug made for a...

Maybe this will help. Right click on image and open link in new window for full res.

Thanks, I'll get one.

Want to check my spark pugs and realize that I have nothing that will fit, what do I need to buy, deep, thin walled 7/8" socket? Can't tell the size could be 15/16....it's bigger than the standard 13/16... Thanks.

Interesting (this is all academic , but interesting in any case). The genset LO calls out OE/HDO (MIL-L-2104), which is different from the OE (MIL-L-45199) specified for the multifuel engine for example. The quote at the beginning of this thread came from one of the hits while doing a google...

Searching the TM can be frustrating at times and the index is not any where near complete, so I wouldn't blame you for asking a specific question here. The brake system is shown in the image below. Note how the master cylinder (MC) output is boosted by the Airpak (Air hydraulic cylinder). The...

An update. Image now includes the 5/8 inch chain w/grab hook, which is really needed for the 20,000lb winch. (Got it from a parts M543 wrecker in Mt Airy, NC this morning.)

I have the first volume and wouldn't mind completing the set....PM me with a cost plus shipping to 24120.

Water cooled aircraft engines, learn something every day....

An adventure, for sure, got stuck exactly like that one time in a septic tank drain field.... Got out after a couple of hours using the hydraulic outriggers, lifting the front out of the mud, piling rocks, wood etc under the tires. The outriggers kept pushing wood blocks deeper and deeper about...

Opinions, pls, found this: " Automotive oil should never be used in an airplane engine. The most important reason not to use automotive oil in an aircraft engine is the number of additives in it that are designed for use in water-cooled engines operating within a certain range of...

:oops: Live an learn, thanks Eric.