Search results

You may want to try MEK. But, be careful the fumes are toxic.

If the truck is in good condition you can drive it and save a lot of money, plus have fun doing it.

CARNAC can help with the unit information from the left size. As above, sand and/or use solvent to clear the right side. From the photos it shouldn't be difficult.

I don't know about Baldwin, but the NAPA numbers are: Internal: ATP 1-4959 External: 1268

I drove my truck around 5 - 10 miles between changes and did all the changes in one day. I wanted to make certain that the fluid was hot and well mixed before draining.

You can find 9:00 X 20 NDT tires all over, ranging from NOS to good used ones. It is also relatively easy to find some already mounted on wheels. If you do buy tires only, I would recommend buying new tubes for the tires. I pay a local guy $25.00 to change out tires for me. It's good to know how...

Get rid of the motor oil anc change to Dexron III. The only reason the Army used motor oil in the Allison was to eliminate one more fluid that needed to be supported in the field. I contacted Allison technical support, not a dealer rep. Allison definitely recommends Dexron III as this is the...

I'm bringing a complete Deuce springer seat rack and cushions. This is an NOS in the box rack and cushions, but does not include the base.

Ditto! Ditto! Ditto! Dexron III = major improvement!

I'm starting out in Hiawassee, GA on Thursday morning with a Deuce. I believe one Deuce may be joining me in Hiawassee. Two other Deuces will be joining me in Clarksville and another Deuce joining in further south. We may be able to join up the two groups somewhere along the way if you are...

Welcome to Steel Soldiers! When I was in the Army I never went to a nice place like Hawaii! Oh well. You will find that there is a lot of knowledge and expertise on this site.

You could obviously make an adapter to use the incorrect front leg. However, the arm on the front leg would extend out a significant distance which means the entire structure would not be as strong. There is a **** of a lot of leverage involved considering the length of the legs and using...

Another potential problem is that you need to measure the length of the front post from the top of the bracket to the bottom of the post. If this exceeds 63 inches total, you need to cut the bottom of the post off. Otherwise, the bottom of the post will impact the right fender and damage it...

The M66 takes three legs to mount on the M35 and all three legs are different. If you don't have three different legs, you need to look for the correct legs. You are correct, the top of the front leg has an angle built into it. The other two are straight. The open part of the right and left legs...

Very, very good job on that video. That was better than many commercials. You made me want to buy an M35 and I already have two.

I could use a drivers side fender for an M35A2. It seems I only see passenger side fenders for sale.

welcome to Steel Soldiers! Keep looking on GL. You'll eventually find something green that will make you happy and not break the bank.

Welcome from the Blue Ridge Mountains of North Georgia!

I prefer an air transfer case. That being said, sprag units work fine if set up correctly.

I can't wait for the rally! I plan on staying for the entire time this year. I should be able to bring a lot of firewood with me like I did last year. Anyone interested in convoying with me from North Georgia, please send me a PM. I may bring my M35A3 this year. If not I'll bring my A2. I...