Search results

There is a plate on the dash that tells what fuels you can run. As for the bio and veggie oils, try a search and see what you come up with.

You can do it w/o help, but it is WAY easier to have a third hand. Make sure the grooves are clean.

RE: Re: RE: Oil line?? Here ya go. It's very easy. Sorry, some of the pics are blurry.

Take the alternator off of the engine. Use an impact to remove the nut. The pulley should pull off w/o a puller. If it's stubborn, put the nut back on till the end of the threads are at the end of the nut and give the nut/shaft a few love taps with a deadblow. If you have soldier B, you can have...

OK, time for some of the ...different pics.

like this.

RE: Oil line Make them. Go to NAPA or a truck shop..KW, Pete, Hose Man, Nelson-Dunn, etc, and just buy 3, #4 swivels, an 1/8 pipe male to #4 and a foot of #4 stratoflex, aeroquip..whatever your flavor is. Just make sure the swivels you get are SAE and JIC compatible. I could take pics to show...

I think the e-mail alerts can be turned off on the profile page.

Is that a gasser?

An 855 Cummins can only handle 2 psi return fuel pressure. As the pressure increases, the engine speed will increase. Eventually, you will never be able to drive the beast because the engine will idle at 2100 + RPM. Why do you want to do this?

Here ya go. This station usually has prices .20 to .40 higher than most of the others around. I paid $3.79 today at Arco, for diesel. I can't believe the way prices go up over night. A friend of mine used to own the Arco station by Jack Murphy stadium in San Diego. He said they would deliver a...

Which ones are you looking for? I can copy the CDs I have and send them to ya.

Heres a few pics. It was a great time! Had a bit of bone chilling wind, but, guess that was good for dust control.

Just gotta get ice and pick up the wee one....HA, wee one, he's freekin as big as I am! Gonna meet up with Hole and KE6KZE in Rancho at 1230, hook up with Tyler and Bigmike around 1330 at I15 and Sierra off/on ramp, then up the hill to pick up mendo069 and Tony, then last stop at 18 and I 15 to...

The Cummins compressors are around 13 CFM

RE: ID Yes it is, http://www.armoredtrucks.com/

Sure, i'll do it, but it will need to wait 'till after the trip this w-end. I had planned to come home today and get everything ready, but my wife had other plans. She needed a tree cut down. That over rode ANY of my plans!

I have a set of installation instructions. I can copy them and submit them in the TM section if you like.

Karl, was there a little rubber, angled lookin piece in the keyway under the washer on the acc. drive shaft? Don't forget to put a new one in or it will leak as bad as b-4.

I have an LDT on a stand in the garage. I could take some pics of it. The heads are off of it.