Search results

Every 20 minute job is but one stripped bolt away from becoming a three day ordeal.

There's no need to change them out.

Anything 395 or smaller will fit.

Voltage regulator is my guess. Time to get out the fluke meter...

Various iterations of those boxes are readily available. They vary in input from 40 amps to 200 amps of 208v 3 phase. Output is usually 120v single phase and a pass through for the same 208v 3phase that goes in, so you can stick several of them together. Some of the larger ones only have...

Some have been found to be too tight. Some found with insufficient grease. I'd be tempted to back it off and inspect it for adequate grease.

As pictured. <100hrs. Starts and runs and makes power like it should.

Reverse in the MT654 is 10:1. Adding low range in the T case puts enough torque on it to split the case. I've seen it more than once. Absolutely don't do it unless you want to buy a t case.

Two separate issues. The first is that the 8.3 has a hard time starting from zero when loaded heavy. The second is the weak T Case. The weak t case is in all 939series trucks. It's just that the 8.3's weakness off the line is more likely to tempt you to use low range in reverse.

My opinion only, based on towing all kids of military trailers behind all kinds of civilian vehicles. The pintle riser flipped is still going to be far too low to get the trailer level. That's OK, because you're empty and tipping forward biases the weight to the tongue, where you want the...

What's your tow vehicle?

Climate makes a huge difference. I'd trade your climate with bare steel against KS or GA + any coating you'd care to use. I've experienced both.

Heavy and slow offroad, NH250 hands down.

@lindsey97 may be interested

I took mine apart and cut a slot in it so that I could flip it over to tow level behind a 5ton on 16's. This would have been about 2018 so I don't remember details but I'm thinking it was a proprietary one-off thing. You're going to need that exact part, or a trailer to tow it on. I'll...

I'd attempt a repair using the stuff they sell for windshields. I suspect that you can get acceptable results that way.

M1101 with cargo cover. $2500 16k GTW lunette trailer, suitable to pull behind a deuce or 5ton, weighs about 4k empty. Clear bed is 15x6. 8000lb axles. 16" tires. Electric brakes. $4600 19,800 GTW lunette trailer, suitable to pull behind a deuce or 5ton. Weighs about 4k empty. Bed is 18'...

Mounts on top with the alternator bracket. Uses longer bolts, which I think I have with it. It uses a longer serpentine belt. I had one (not any more) and didn't think to get the part number off it.

New in the box AC for your HMMWV. Made for the 4 door M998 variant but could probably be adapted to pretty much anything. $2500 Pics in the next few days.

Pics of it on the truck -