Search results

Exactly correct about driveway. This will most likely require freeway/highway over 50 MPH. IMHO

You may have a bad unit. They may have unplugged it to force the fan to stay on because it was not turning on or activating properly previously. If you reconnect that, watch your engine temperature very carefully and take your vehicle for a drive at highway speed, being prepared to pull off and...

Look carefully at the breadboard. I bet something is blown on that Nartron EESS.

If the PCB/EESS unit does not cycle properly it can blow glow plugs.

I posted… but many others contributed and/or were quoted. https://www.steelsoldiers.com/threads/how-to-bypass-pcb-i-am-aware-some-hmmwv-owners-have-done-it-tobash.182560/

Re.: blown glow plugs. Rebuild you PCB/EESS as per my posted instructions, or purchase a rebuilt or a new unit. IMHO

The more I work on HMMWV, the happier I am that I’m able to make parts with angle grinders and plasma cutters. Enough people make fake display 50-cals and munitions. You can whip that piece out in 10 minutes with a plasma cutter, a drill, some drill bits, and a grinder. Then just bend or make...

Can’t see how start box would cause smoke unless it was affecting fuel cut off switch somehow

You get what you pay for Bulldogger. Search and read about rebuild nightmares.

Exactly

Two ladders each side with 2”x12” each side on the third ring all ladders. Bonus is no lifting tires.

Just what I needed to know. Thanks! Looks like I will need to make an adapter from 1/4” flat stock plate. I’ll plasma cut two rings and weld together. Upper ring inner DM 4”. Outer ring upper DM 4.6”. Lower baseplate ring inner DM 4” with outer DM 6”

Want to do a rough balance of rims. Will the Harbor Freight bubble balancer fill the center area properly to allow for balance? Will the Harbor Freight survive balancing 165lb. Wheels? I searched but no love.

I’ve noticed that after bleeding procedure I need to let vehicles sit overnight for full benefit.

Different boxes. Different manufacturers. Different behaviors.

OFF TOPIC Too many times I have had to decline requests for handicapped parking permits that were requested for “questionable” reasons. Mog, as usual, you have my respect.

Rebuild that unit. I posted schematics years ago. Not all my work, but I took the initiative with permission from others involved. I can also help with a rebuilt one, as can others. I prefer if you DIY, but I have in stock. So do others...

Feel your pain brother.

Best idea is to purchase new IP. My mechanic suggests marine IP and swap the 8 nipples to accept military style. Upgrading to marine IP and injectors wakes up the engine according to him.

That’s a mighty fine looking rig!