• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. engineer233

    New - How to post my M886 in classifieds

    You have to have at least 100 post in the forum before you can list anything in the classifieds.
  2. engineer233

    Milky antifreeze

    I like the idea of taking off the cooler and pressurizing it with air. I will try this on Thursday evening. Do these have any orings in them ?
  3. engineer233

    Milky antifreeze

    Thanks that will be very helpful. I done some checking and found used coolers from $300-$800. They are kinda pricey. This seems to have just started so I hope I have caught this before it causes another problem.
  4. engineer233

    Milky antifreeze

    How is the best way to check to see which one is the problem ?
  5. engineer233

    Milky antifreeze

    I have a small problem to say the least. I have checked the antifreeze a couple of weeks ago to check the level. Tonight I opened the radiator cap and saw the antifreeze is now milky in the reservoir tank. The radiator seemed not to have any in it yet . I then checked the oil. It was ok. The...
  6. engineer233

    M923 Trans prob? Please help

    Best of luck with GL. Bought my M923 and watched the video of it moving and running before I bid. Won it , drove it 400+ miles toward home and a bearing went out in the transfer case. This also had to be at 1am and 150 miles from home. Most of us on here feel the same pain you do. The bottom...
  7. engineer233

    Rubber Duck finally rises up...

    Love those wreckers ! Wish I had one.
  8. engineer233

    Oil Leak and pressure question.

    I have a small oil leak to say the least. I have a M923 with a NHC-250. This is my first 5 ton and am going through a learning curve with it. On the way home when I picked it up it started leaking 1 gal every 50 or so miles. Got the truck home and pressure washed the engine , later started it...
  9. engineer233

    M 923 transfer case rebuild

    I made the mistake first. I knew it was 809 series but wasn't thinking I guess. Either way we all understood what we were talking about. As for my tc I hope it's a normal sound but my luck it wont be. This afternoon I will change the gear lube out with 1 gal of lucas oil and the rest with a good...
  10. engineer233

    M 923 transfer case rebuild

    Thanks. Definitely don't want to lose any speed. I really like this truck just hearing a little rattle as I ease off the fuel and the tc gets a little slack in it. I would rather rebuild my case but am running into trouble finding a kit. I may just tear it down and have to go bearing by...
  11. engineer233

    M 923 transfer case rebuild

    Is there another transfer case that will interchange with this one ? Would it be possible to use one out of a 800 series truck with a little modifying ?
  12. engineer233

    M 923 transfer case rebuild

    Thanks I will and find those.
  13. engineer233

    M 923 transfer case rebuild

    Anyone know who or where to get a rockwell t-case rebuilt ? I would consider doing it myself if I could find a rebuild kit and TM . What are your thoughts ?
  14. engineer233

    m923 recovery/towing checklist

    While driving my M923 home I broke down and called a wrecker. I pulled my driveshaft just before the wrecker showed up. There was a service and emergency air hook up on the front of my truck just under the bumper. We hooked the wrecker up to those and and it worked the brakes perfectly...
  15. engineer233

    Electric winch

    I have a 12,000 warn on mine. It is 12v so I added a 12v chevy alternator and a deep cycle battery on my truck . I only had to use it once so far . I used a snatchblock with it and was fine. If the truck had been buried it probably wouldnt have done it.
  16. engineer233

    M 923 Transfer case not shifting

    I have the rear drive shaft out and the front axle not locked in . The noise is still there when I put the truck in drive and run it up. It is in the tranny or t-case . I will be able to check it further on Wednesday. I feel like an idiot , I didn't try to shift it into low range before I...
  17. engineer233

    M 923 Transfer case not shifting

    Everything looked as if it was just changed.
  18. engineer233

    M 923 Transfer case not shifting

    Hey guys, I have a problem . While driving my M923 home from FT. Lee last week I made it 400 of the 560 mile trip mostly uneventful. While driving I started to hear what seemed to be a bearing going out under the cab. At 2am I could not determine exactly what it was . The truck still seems to...
  19. engineer233

    M923a1 transmission fluid?

    I was recently at the local national guard depot in town asking a few basic questions about a M923 before I go and pick up my truck. He said dextron III would be the preferred in the trans or even run farm tractor TDH (trans, diff, hydro fluid ) would be ok.
  20. engineer233

    Code Enforcement

    This is true , dogs aren't really at fault it is the owner. I control my Jack Russell by putting him in a pen when I cant be outside with him . My neighbor is a good guy but is just too opinionated . In all honestly I am gonna talk with animal control if he doesn't keep his dog up. I will...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks