Search results

Looks like nobody has posted to this thread for a while. I guess it isn't snowing anywhere? We finally got some snow and while most of my playing has been in the humvee, the 5 ton needed some play time also. It took me a while to make the pile.

Here are a few more videos from djones.

Good times at Haspin. The weather was awesome and the dust was crazy. It was good to see the regulars and meet a few new people.

I am looking forward to it. I hope we have some nice cooler weather.

I finally got some time during my furlough this week to look into my 5 flashing light problem. Once the truck hits 120psi, the system does a check and goes right into the 5 lights. I checked the tires and the front was at 50, the middle was at 50 but the rear was at 40, both sides. I aired the...

I removed the top and the duct from the fan to the burner duct looks good. Everything looks pretty clean in there. I can hear the fan that goes to burner duct kick on or at least I think that is what it is but I don't hear an igniter clicking. With the top off, it that the metal box attached to...

I bought some new flex duct to try out to see if it was going to do what I wanted it to. It worked pretty well but I only have vent mode again. I just used the heat on it a few months ago and everything was fine. I'm not getting the ignition arc again. I checked that the wires didn't come loose...

After a great time at Haspin comes a day of trying to get Haspin out of everything! Man that stuff really packs in there! It was great to see everyone and meet a few new folks.

It was an awesome day, couldn't have asked for better weather. I only got a couple of pictures.

I sent my pre registration in today, I will be there for Saturday if it gets approved.

Thanks for the feedback. I'll look for some loose wires behind the dash to see where they go. The holes don't bother me, just more curious as to what might have gone there and if was anything I should try to hook back up and make work. Thanks guys.

As the title says......

I have seen in the past things I would like to bid on in Washington but that is a long way from Indiana. Anyone have a connection they deal with in that area that could help with picking items up and getting them shipped to Indiana?

I messed with it a little more today, pushed a little air through the tube with an air hose and blew something out of it. I felt it hit my hand but couldn't find what came out. I haven't done the tests yet, not enough hands and no clips on my tester. I'll have to mess with it more when it gets...

Is there a different TM other than TM 9-4520-271-14? That is the one I'm looking at and all I can find is "Repair is limited to replacement of defective parts". I may just leave it by passed if nothing else. I'll be the only one using it so I'll just make sure to keep the doors closed.

Thanks 155mm, I bypassed the switch and it worked. Now to find a replacement. Does anyone know the part number for a compatible switch? I'm not finding anything online for the part number in the TM.

I picked up a new to me Choctaw H140 duct heater earlier this week. I was excited to get it home and fire it up and see if it was going to work for what I was hoping to use it for. But, right now I just have an expensive duct fan. Vent mode is the only mode that works. I filled it up with off...

Thanks for the input guys. I may just loop it and see how things go.

So I noticed yesterday that I had ATF dripping from behind my passenger front tire. After taking the ATF soaked filter out and cleaning out the canister, I came inside and started reading through threads on the vampire issue. Lot's of great info! Back out today to check the transfer case, about...

It was good to see everyone today. Here are a few pictures.