Search results

so I added ground wire it did it again , replaced with my old switch .... did it again . I don't know where to start for this and its only low or the high beam that cycles on and off , lights are steady then it just starts slowly turning on and off . turn the switch off then on again its fine...

Think I may swap my old back in and see if it works

Is it located near the cannon plug?

New push button

So I made another thread for what I thought was a ground for the alternator mainly because my headlights would intermediately turn on and off. I cleaned all grounds and positive cables and took it out for a test run about 10 minutes into ride again headlights intermediately on and off , turn...

The battery ground lead cable runs to a stud on the front of the starter motor housing. From that stud there is a braided strap over to the drivers frame rail. That is how battery ground reaches the rest of the chassis… ------ Mine has a good amount of rtv type substance on the front of...

Yes I found it , already cleaned the connections on the polarity box , curious when the change from being the Polarity relay box went to being the newer LBCD .

Those are on the list today , although I don't remember ever seeing one on the starter will be going out to check soon

Thanks I believe it was the grounding strap I cleaned connections on grounding strap, Both 28V and 14V wires and terminals at battery . Seems to be working OK. Thanks for the quick responses greatly appreciated

So I noticed my voltage was a the bottom of the 28V on my gauge, I went and check the alternator out put and they seemed fine but was curious does the voltage regulator lights blinking on and off green normal or do they need to be steady , no other colors just green , I just took it to the...

Yes there is a different in size the top for all 4 are the same ( a smaller Bolt ) and bottoms are all the same , with that I went to a farm store and got some 8 lift arm bushings 1/1/8 to 7/8 reduction part number 228CO006TSC for the shock eyelets and these are fine for the lower bolt size ...

So I ordered some Monroe Magnum 65456 but they are way to short , are there two versions of these shocks? I measured the 65456 and extended its 26" but the Monroe chart is stating EXT is 32.88. Edit - Never mind seems the one I opened was different then the other three / others fit...

Did you ever install the 65456 ?

Yep that's the first place I went , the had larger non metric but no metric

Too big for the ones at local hardware , think the highest they have are M16 / Measuring it with my caliper I believe its M20 -2.5mm x 50mm

wow thanks for the info

So I'm curious if there needs to be some sort of bushing between the mounting plate for the latch and the cab mount ? Mine has some play in there but the bolt is tight and I didn't know if its normal

Good eve , I was curious if anyone knows the size of the rear transmission mount bolts seems mine is missing a few.

Thanks Ronmar , I will check it out tonight

I got it to turn, I was gentle with a pair of cannon plug pliers ... thanks for the help