Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well, by the title it sounds easy!!!
By the way, a salute to RonMar on an incredible explanation of the air system in these trucks. Thank you Sir.
I have a set of parking brakes that release anytime there is air in the system.
Now I can release them if I remove the line on the Inversion Valve...
The conversion is going great! And I plan on giving more information when I am done. I encountered another problem and looking for a remedy, I figured and proved that as soon as I bump the starter button, the starter lockout relay does its job. My 24 VDC alternator is a one wire alternator and...
So in further pursuing this issue I went to Allison and the parts department at Florida Detroit Diesel said that Allison has no resolve for this. I then got ahold of Weller Truck Parts, Grand Rapids, Michigan, pointed me in the direction of their remedy and that is Drain Plug 29510885 (7/8" x...
Gentlemen: I said to myself, why reinvent the wheel?, Come to somebody who has already experienced this. I removed the drain plug on the Controller Box on the bottom of the transmission and drained the transfer box. I changed the filters and reinstalled the drain plugs to find out that I didn't...
Please instruct me...... What is in conduit rating versus free air ratings?? I mean I know what the name implies but how does that effect the amp ratings on small wiring such as what we are using? Thank you?
The other thing I am dealing with is the unknown future load, incandescent or LED, what...
So I have started the Alternator Project and am installing 24vdc 110 Amp Alternator and I gained access to my Power Panel. I am going to install two Orion Victron's to this unit, one will be operating my 12vdc running works and one will be wired for my Emergency Side, lights and communications...
I knew what you were thinking and the froth in the water is that of fresh oil but then it was serviced in February, moved 30 miles away and then sat. So I would have fresh oil either way. I figure the best thing to do since its a mess anyway is fill the crankcase (I figure the Motor Oil is down...
The oil isn't even on the stick and the Transmission has all its oil. No I haven't started it because I don't know if they want to pursue warranty work from the previous people who did the work or what. If I touch it they might attempt to use that as an excuse. Been there, done that, Not fun.
Thank you. It was stated by the ones who have the truck that the head was magnifluxed. You really don't like to ignore the input but the question is was it? This truck is pristine with only 4000 miles on it. What can go wrong ??? LOL The bright Cat paint isn't even burnt off. Like I say first...
Well it seems that it is just the basic maladies then. I was hoping someone would point out the unique to this truck only oil connection. Going back over other mechanics work is really tedious but needs to be done. I guess the first place to start is refill the crankcase oil and drive it and see...
So for a wrap up on the wiper situation. This is a bit embarrassing but you guys deserve a follow up and humbling is always good for the soul. So after looking at the parts list I was sent and the information y'all fed me I suddenly realized that the passenger side wiper could not be broken if...
Well I got more information on this. Apparently it is an on going problem.
Oil Cooler was originally replaced first. Then there was still Motor Oil in the Coolant/
So the Head Gasket was replaced and the Head was allegedly milled. And they said that there might be some trace of oil still...
This is a sketchy beginning for a question but I been called to analyze why a vehicle that has just returned from having a Head Gasket installed has oil in the cooling.
I don't know the history of this vehicle but I can say it hasn't been used much.
I don't know why the Head Gasket was replaced...
And the linkages for the Wiper arms? are they easily accessible or ....what? Are parts readily available? And if you have to service the arm and linkages behind the windshield, does it come out the front by removing the area?
Thanks again
I have never been faced with repairs to the wiper system but now I am and I looked to how to even approach this.
The passenger side wiper is not working and has free movement. The Driver and Middle Wiper work in unison. I looked in the defrost area hoping that the linkage was there and no. So...
I went back through the video and it explains well. Pursuing clarification. I intend to order the Victron Orion and mount it in the right kick board area like you stated. If I run a 4 gauge wire from the 24vdc Alternator to the Orion under the dash, and then a 4ga wire from the Orion to the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!