Search results

Yes please send his info thank you!

I am need to move 8 to 16, 395/85 R20's on wheels from ft Hooks to Columbia Sc? Not sure if any one has a trip planned but please contact me if interested I have lots of parts and or cash for the help. Thanks

Skates I made for solo axle moving. I did axle removal and disassembly with out heavy equipment.

Great job! It's good to know I'm not the only one whittling paper.

Here are a few of a 923 I just sold.

I noticed the truck on flebay today did the buyer not come through in Tn? Good luck with the sale!

I am looking for 939 cabs? Also 939A2 8.3 alternator? I have a m35 PTO winch for sale Frame extenders, and cable looks brand-new the handle to engage and disengage is missing, and appears to be sheared off where the handle mounted $350. 939 Driver and passenger seat's both in decent...

I do not but I will try to get some numbers off of the box. I did use everything except the pump from the donor truck and it cost $200 bucks. The column and mounting bracket, shortened the steering shaft, modified the steering wheel hub to accept smaller wheel, pitman arm, modified the...

Here is a picture of my setup, bobber, lifted 8 inches. The box is an over the road international I believe.

Looks good! I'm ready to see I picture with the loaded trailer behind it!!

I ran into the same issue this week. I had a 13,6 trailer to deliver and it measures 14,7 when hooked to the truck. I also have a donor truck with a civi 5th wheel that I at least considered. I know it was mentioned above that over rough terrain the frame corners would possibly contact, but...

Here is what I came up with. 44 1/2 between charge tubes.

I did some measuring on a sterling over the road tractor today. It had a 60 series Detroit diesel and the cooler was 2 1/2 inches thick. I need to do a bit more measuring but I think it would fit perfectly around the radiator there is 43 inches between the charge tubes.

Yes I can get that measurement as well. The only problem with that open space is it's closed off from all sides. Ie the radiator is larger than the hole or void, making it impossible to run charge tubes into that area. There is only 3/4 of an inch of clearance between the frame of the hood...

It looks like 6 1/2". Is the thickest radiator intercooler combined thickness. 7 1/4" if you do some cutting. The overall dimensions of the radiator are approximately 43 inches wide and 31 inches tall. I think if anything the whole radiator could move a little bit closer to the fan to give...

I have already tweaked my 8.3 and EGTs go through the roof. I would suggest taking some measurements of the space and getting a radiator and intercooler out of a salvage truck. From what I measure doing a radiator swap is the only way to put a sizable intercooler in front of the radiator. If...

I did a dog house in the front and long telescopic.

This is a sweet looking setup! How are the tracks tensioned? Just curious if he has a non drive axle that slides they look snug.

I saw this on trucks gone wild! You did a good job on the adapters!

Home-grown I just like weight over the axle!