Search results

Hummer H2.

Delete

I bought a set on ebay. They only lock and unlock from the outside. Essential, but I hate them.

I thought I kinda said that. Lol At this point people either get it or we are :deadhorse:

We have stock wheels that balance the weight closer to over the hub bearing whereas wheels that extend further lateral move those forces away from the bearing and load the bearing eccentrically causing the spindle in effect to point upwards somewhat and place more stresses on the bearing and the...

Our vehicles do not have straight axles going from side to side and our spindles might only be 10 inches long. On the rear axle for a solid axle, the bearings don’t take too much additional stress with extended wheels. They have a long cantilever to counterbalance. On those same vehicles the...

Horse….. Water…..

Deleted

Please look up blue hummers and spindle failures. More common than I think you’re aware.

He needs to open the current unit and identify what went bad. Might be simple or might be expensive. Might need new alternator. Might only need regulator. Might have fried a simple spring on a brush. Might just need to fix a loose wire. Might meet new stator in which case the entire unit is...

That much offset is trouble. I hope you have "BlueHummers" .

Coug, I think you mean dual amperage 200 amp alternator. They are all 24 ( 28 Volt). 😉

When you hit a dysfunctional PCB and it starts to work it means a solenoid is going bad. Look up my thread where I collaborated with others on how to build a DIY PCB or PM me if you wanna buy one. Post number 51...

Aluminum brazes with Zinc alloy, not brass. There is a guy who sells the brazing stick for Aluminum. Has YouTube videos.

RR vs Jeep is a long ways away from RR vs HMMWV. HMMWV’s long wheel base and wide wheel base and roughly 6-1 gear ratio with huge wheel travel and 37” tires is amazing.

How do you like that top? I’m considering one.

Does a skirt come with that LandRover and sensitive kidneys??? Man up and learn to piss blood. Then buy CEPEK adjustable shocks

It’s not just springs… you need to factor in the shocks. Consider CEPEK adjustable shocks

Just put something else in the hole and call it a day

What grade stainless did you use? I guess the screws were perhaps lower in chromium content. There are different grades. Stainless I use in surgery is much less corrosion sensitive to many commercial applications. The OP is mounting to Aluminum and Steel surfaces. There will be some corrosion...