Search results

I had some for sale for $1000 for a setup in PA. I might be able to track down another if someone wanted it.

also recommend making sure to get a clear title in hand. otherwise you are very limited to what you can do with the truck. off road use or for parts

That is a very big order for 3k. I know there are trucks with winches for 3500 in Virginia. Not sure about a hard top and needs no work. I have seen them bring more then that from GL in nice shape with a winch and a hard top. and condition unknown other then the pictures look nice. I...

M35A2 without winch. It looks like it had a rebuild on it at some point a. VIN number : 115857 b. Registration Number : Unknown c. NSN : 2320000771616 d. Purchased from : GL on 29 December 2010 e. Bumper numbers : Painted over. M1008 a. VIN 1GCGD34J2GF417179b. Registration Number : Unknown c...

why are you looking at traveling so far? Isn't there anything closer to you?

IT seems like the biggest issues with an air start is the tanks draining down. Or at least thisis the one that is uoted the most here. What about a simple valve you would turn to cut off the air supply and save the tanks?

It seems like I missed a great time. Hopefully this will be an annual thing.

I have a setup from a tractor that i am going to put behind the cab so i will have a good place for the spare with a lifting device to help get it up and down. I haven't found a source of the control valves. There are two valves on the stock setup one just dumps the fluid to the tank directly...

I got the following A3 parts for the winch I have the motor, the pump, the coupler between the motor and the winch, the adapter that connects the motor to the winch body. I have the air controls to activate the motor and the directional switch. I still need the two valves one to activate...

I wil have to look up the numbers to see what ZF it is. It is in my M36E3. I have a few things on here posted about the truck. I think it is either an S542 or an S547. I know it has a .76 overdrive ratio.

I have a 5 speed ZF behind the cat in mine.

I was quoted 13 cents a pound today for iron.

that trailer weights about 2200 lbs empty with no brakes that trailer can get you in trouble quick things you can do 1. flip the lunette 2. change out your axle with a different one preferable with brakes 3. take out every other leaf in the spring pack, leave the helpers in place I have...

you won't have room to shoot a 50 cal would you?

I have a write up on how to do this with a voltage converter. search for my user name you should find it.

i have a case 580b backhoe so i am familiar with operating the valves a little at a time to have better control.

I have some but mine are in PA. Probably too far away.

can you get any pics of the air cylinder setup?

The valve i was looking at is set at 1500 PSI relief but it is adjustable to 3000 PSI. I see in your post that it should be set to 2200 psi. The info that i have on the pump says that it will only produce 13 GPM. But i don't know that RPM that is based off of. On the valve electric...

I didn't see anything there that i could find at a great price. So here is the break down - pump on engine check motor on winch check coupler between winch and motor check winch, brackets, frame extensions etc check control valve with relief valve, found source tank, found source...