Search results

Random thoughts: A hot water pressure washer will help remove poorly applied paint. Are you going back to a Viet Nam impression? If so CARC is the wrong color and texture. Most of us over here are abandoning expensive CARC and going with water based acrylics.

All over ebay

Check ground stud on shunt where it passes through the body.

Once a driveshaft tube is bent or has a kink in it, it’s hopeless to straighten it. Even if you get it close, these spin so fast that the vibration will damage carrier bearings.

For sure the Hawkers are better than the Optimas. On a maintainer I have gotten 10 years out of them. Not so much on other AGMs.

Tell the owner to fix the water intrusion, have him drive it several hundred miles, then revisit the purchase.

Well now you know. Needs a seal. Make sure nothing wobbles before you pull it apart.

Connector to HMMWV 200 amp umbilical !!NOT slave cable plug!! | SteelSoldiers

Hard pass on that one.

Is it GO90 or BFS?

GP will side forklift your new HMMWV onto anything you want.

Absolutely, your truck is a Jar Head USMC veteran. Front bumper should have paperclips welded on that go with those rear lifting brackets.

M893 needs some roof rust repair too!

What’s the tag number?

If you get an inkling that the export restrictions won't be enforced, I can tell you that more than once I have been called to get a US Military truck back running after sitting in impound for MONTHS/YEARS at the Port of Houston.

If this truck were mine, first thing would be to replace the turret hole cap so the rain will stop soaking the interior and instruments. Next I would focus on the driveshafts (read up on possibly needing a puller to get the ujoints apart). Next I would pull and straighten the tie rod. Next I...

You are looking in the wrong place. Fuel filter restriction = less fuel available = better fuel economy. Look for other issues like increased drag.

If all I need is a good 6.5 engine (which I do), the last thing I want to do is buy a truck with an unknown condition engine in California or Georgia (for many thousands of dollars) then pay more thousands of dollars to ship it to me, then have to deal with the BS of selling the residue and...

Did you check the usual suspects like the pass through ground stud on the shunt?

If you are keeping normal size tires, the 4L80E swap is recommended.