Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have my solenoid out by itself and want to test it. what method should I use? When it was in the rig it would disengage from the starter several times before it would finally stay engaged long enough to start the engine. Once the engine was warmed up she would start right away.
1991 Humvee...
Today coming home the Generator gage went over into the red and stayed there a couple minutes then dropped down into the green and slowly started to drop lower.
I'm guessing that it stopped putting out voltage to the batteries.
How can I test to see if it's the voltage regulator or the...
Hi
When the engine is cold the solenoid will disengage after one or two turns. Once she is warmed up from either the block heater or from been driven she will start right away .
My thought is that the starter solenoid is the problem.
I hope that this is making sense .
Ken
Hi
When I try starting her she will turn over but disengage . Sometimes she will stay engage long enough to start . Once she is warmed up she's fine.
Is this a problem with the starter or the solenoid ? Has anyone used a rebuild kit with any luck?
Ken
Hi
I have a 1991 and when I'm driving , I hear a whistling like sound and when the fan kicks in it get's much louder.
I'm thinking It my be something with the fan assembly but what I'm not sure. Belts seem to be tight.
Any ideas?
Ken
Good day
Question, is it normal for the fan belts to bounce up and down when she is running? I have adjusted the tension on them with no change.
Thanks
Ken
HI
Replaced the voltage regulator and brushes but still in the yellow. Measured voltage at the voltage regulator with her running and measured 24 volts.
Question? Am I reading just the battery voltage at this point? Is there a way I can measure just the alternator output?
Other ideas?
Ken
Hi
I have added a regular trailer hitch to my Humvee . I have it wired right now for 24 v but want to change it to 12v . Not sure what would be the best way.
Need ideas.
Ken
Hi
Ok, with the batteries charged up and the engine running, my volt gage runs in the middle of the yellow. I added leads across the gage, and it is reading around 22 volts. As I drive her the gage will run down to the bottom of the yellow and still read about 22 volts.
Is there a way I can...
Hi
I am on my third heater. The first one lasted about a year and a half. The second about three months and the last about three weeks. All three are Kat heaters. I have made sure that the heating element wasn't touching on the inside and I never had them plugged in over four hours.
Has...
Hi
I installed a Kat's frost plug heater last year and it worked fine for a year and then went bad. I installed another one a month ago and it has gone bad also. I used the latest one about six times. Has anyone else had any problems with this brand? Is anyone using a different brand with good...
Hi
I posted this problem before and the responses didn't help. Still thanks for the help. Anyway I unhooked the fuel line coming out of the fuel filter and fuel is coming out. One question I have is should it be a steady stream or a pulsing one? Also someone said to check the automatic fuel...