Search results

By the way, Who won?

I love riddles.

I agree with Tim, mine had the same symptoms as yours. I checked the voltage on both batteries and they read good. So thinking the batteries were good I went on a gremlin hunt for the next 3 hrs. Was ready to bite the bullet and drop the starter but decided to Load test both batteries first. The...

I thought that some of the early CUCVs came with mounted "swivel style" hitches? Correct me if I'm wrong.

Same with me, He sent a used pump out to me and said if it worked to send him payment. That is unheard of nowadays.

A well known auction site has two separate vendors selling NOS cargo covers for the M101A2s. Also M1008 covers will work in a pinch if you can find them. The problem there is they are just a tad short to get the rear zipper to fully close. and they have plastic windows on both ends.

Why make it complicated, just take a day trip with a wad of cash. You shouldn't buy "sight unseen" anyway.

When I had mine out I was able to reach up in the passenger side and found a mouse nest and other debris stuffed by the heater fan. Was wondering why I didn't have much air flow.

I hope you have a padlock on those LED headlights Rick. They would look cool on my Blazer.

I'll be the first in line to take it off your hands in a few months. Great job.

Don't bother with the drive shaft; It looks like you cant get it out the door now.

As cpf240 mentioned, you may want to check your injector lines. I thought I had a rear oil seal leak but it ended up being a fuel leak and it ran down the back of the engine and out the drain at the flywheel

To bad you sold your tarp kits. It would have looked good on Mr. Rusty

Rick, do I see some wheels turning?

I assume I had the better way.

Start with checking your glow plugs first, you may have a bad one. If they check out ok than move on to the card like jterry suggest.

Was that your problem?

The Thread title was M1009 Rubber Antenna Grommet so I assumed you were talking about the grommet that enters the blazer fiberglass top"1/2"+-. For your application it should be fine.

I don't think that those will fit. B & E dimensions are way to small.