Search results

Which part, that the outer cover frays, as it did. That is hard to see if it is on all the way, found that out, not needing the clamps, Just like redundancy, It was interesting that the driver side was leaking after changing the passenger side, and it was the one that did Not have any hose...

Well just finished passenger side return lines with new, IMO I don't care for the cloth outer cover as it makes it difficult to see if hose is all the way on. Also looks so so with fraying. A few pictures new and old. Hope they don't leak. Thank you Sent from my SM-G975U using Tapatalk

Well sometimes things don't appear as normal. Look closely Sent from my SM-G975U using Tapatalk

Thank you so much, that's awesome and What I like to see. Sent from my SM-G975U using Tapatalk

Just received a new glow plug control module (card) From previous conversations It was said NOT to Rely on TM wiring diagram as shown. As it shows resistor feed wire and small Orange wire coming from gpcm both connected together on gp solenoid large post. I do not want to damage the new...

After reading over this and connecting my MEP 803a to my house service , this picture shows I isolated the neutral bar on my set. Thank you Sent from my SM-G975U using Tapatalk

That's strange that didn't fit. this is what I got on my 803, no problem Sent from my SM-G975U using Tapatalk

That's good news, this is a 803a? Sent from my SM-G975U using Tapatalk

Get one of those other brands just to confirm like a Napa Sent from my SM-G975U using Tapatalk

Like you said possible mix up or manufacturing problem. Sent from my SM-G975U using Tapatalk

https://www.steelsoldiers.com/index.php?posts/2107209 Check this link out. Maybe give you some help. Stay safe. Sent from my SM-G975U using Tapatalk

The only thing that is bothering me is my truck is a 86. Looks like oem smooth fuel rubber return lines. The new line are Woven fiber outer In I presume rubber inside. I'm heard or read people having failures with this new design. Am I reading wrong? After the truck is 34 years old with looks...

OK what was hose part number and clamp part number please. My gm parts guy quoted $120 just for hose. Thank you. Sent from my SM-G975U using Tapatalk

I see, so sometimes if your told reference the TM , although TM might or could be incorrect. That can be frustrating, make you think it's something that it's not. Thank you, Sent from my SM-G975U using Tapatalk

Are you running OEM glow plug card setup? As the TM calls out the smaller orange wire as voltage sensing wire from gp card, not counterdicting you just trying to figure the issue out. Thank you, Sent from my SM-G975U using Tapatalk

New to me D30 Having some wiring issues on the solenoid. I've attached to pictures 1st picture showing how mines wired up 2nd picture showing the TM. So by looking at the TM the small Orange wire in this picture that's on the bottom large post ( with the other larger orange wires going two...

Here are some pictures, People criticize me before because that steel on aluminum, but if you notice there is a thin piece of rubber in between the metal and the aluminum to protect that situation. Thank you, Sent from my SM-G975U using Tapatalk

Breaking them out and testing them up....... Sent from my SM-G975U using Tapatalk

I'm guessing 10 to 14 horsepower. Sent from my SM-G975U using Tapatalk

Yes I've got the very same truck except for it's just a cab and chassis had the maintenance Box on it which was removed it is camo though Sent from my SM-G975U using Tapatalk