• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M35A2-AZ

    M-923 start's uphill longer

    You have an air leak in the fuel line some place, or the o-rings in the primer pump are bad, or a leak around around the fuel filter.
  2. M35A2-AZ

    Photos of My M916

    They are jack stands for the trailer when he parks the trailer.
  3. M35A2-AZ

    New member introduction from AZ.

    Welcome to Steel Solders!
  4. M35A2-AZ

    M923 back together!

    Bill, Thanks, I also used bed liner in my M35's I have done and I like it.
  5. M35A2-AZ

    M923 back together!

    I also used POR15 on the floor after welding.
  6. M35A2-AZ

    Oil pooling in air filter housing

    It is coming from the Transfer case vent. One of the valves on the Transfer case is linking.
  7. M35A2-AZ

    M923 back together!

    I had a truck that was that way, I cut all the floor out and replaced it. I bit of work and welding, but you end up with a good floor.
  8. M35A2-AZ

    1954 M37

    Looks good!!!
  9. M35A2-AZ

    M35A series brake shoes

    Sorry I do not remember the cost, But I know it was less then new shoes. Any Brake and clutch shop should be able to do it. https://truckpro.com/locations/
  10. M35A2-AZ

    M35A series brake shoes

    I had some shoes relined and they have worked fine.
  11. M35A2-AZ

    Shooting with Rapco- Tips?

    It all looks good, nice job! Did you use just their Standard primer? https://www.southernpolyurethanes.com/epoxy-primer
  12. M35A2-AZ

    rebuild cost? NHC 250

    Yes, I would look for a take out or a Gov. rebuilt. But I have new liners and pistons it you go that way.
  13. M35A2-AZ

    30 mph tops

    I would think if you do not see a difference in high or low, I would say it is in Low.
  14. M35A2-AZ

    30 mph tops

    Nice looking restore. I would check fuel filter, maybe the timing.
  15. M35A2-AZ

    Super Single Wheels

    This is the p/n for the M929 wheels 12363603 2530013030801
  16. M35A2-AZ

    Charging the batteries......

    I would charge them one at a time (12v)
  17. M35A2-AZ

    can't restart after changing fuel filters on my M923A2

    Did you open the blead screw on the back of the pump to let the air out? It is a 10mm bolt on the back of the pump.
  18. M35A2-AZ

    Hi from Arizona

    Welcome to AZ
Top