Search results

I have a contact that has about 150 used motors in stock , What are you wanting to install into ? I am putting on in an early power wagon . Helped a friend install on in a Dodge Dakota . PM for contact phone number if u are interested

I have OEM , part laying around . You still in need of it ?

I agree 1 knuckle under for full and open or check the vent

Welcome from northern, KY !!! 35 miles south of the Mason Dixon line !!!!

I am in need of 1 of the barrels that fits on the shaft to adapt to wire arm . Anyone have 1 ? Thanks,Dave

I use a square point long handle shovel to raise the tire and wheel onto the hub !! Sounds strange but it works great and is easy to use saves on the back !!

Needs air Pressure to operate new style air switch!! Just short between the two wires at the switch no matter witch type you have and they should light . Also the 3 lever switch must be have power to lights on . Test with a test light to see if you have power at the brake light switch , if so...

The only thing I hated about the Kentucky Jelly they gave us in jail was there was not enough in the little pack to enjoy on your crackers !!!

1962 Dodge I will get phone number later and post !! But feel strange about posting someone's private phone number !! May be just PM me if interested in phone number ?

1962 w500 The 1 I saw was a 1962 w500 as in the picture on second post !! It was a 4x4 truck with a 318 poly !! Strangest front axle I have ever seen in an 4x4 or 6x6 !!! Setting in scrap pile

Surprise !!! I just saw that same truck in a salvage yard in SE Ohio !!! W500 Dodge 318 Poly engine , strangest front axle I have ever seen in a truck . PM and I will try to locate the owners phone number for you

I got it all straightened out !!!! Thanks again for all the help!! I have been a few days wandering what the heck , it will not clear out !!! I guess I need smarter than the machine !!! Thanks again and be safe playing stuff is heavy !!!

Just got back to looking at SS , health been a little sour recently !! I used a Garrison Power Assist on my truck . It works great !! Can anyone help with info on how to clear the PMs . I used the tab to empty folder and answered Yes when ask but still full !!! Must be a KY thing "Brains"...

Not a problem !! I must need help clearing my PM folder !!! I open it and it has a tab "EMPTY FOLDER" I hit that and it asks YES I hit that and no change !!! Anyway it must be a KY. thing "BRAINS" !!! How can I help you ?

sounds to like the spring have up the chase on the front detent ball !!!! I am betting a new spring and ball and U will good to go again !!!

I have the adapter, bell-housing for manual trans, starter and vacuum pump that you will have to use . I have a non canted to GM bell-housing adapter . most are canted 15 degrees

Your propane needs to heated and vaporized !! I don' t know if you are doing this or not !!! But taking straight from the tank causes the propane to cool because of the pressure drop from tank to atmosphere . When this happens without heating it it has a tendency to return to liquid , this is...

Old head gaskets are made to weep !!! Between the head and block !!! Mine was blown out pass side near firewall . I could feel compression leaking as the engine was running !!!! I made my head bolt wrench by cutting off an offset box wrench and welding a nut onto it for a socket to be used to...

You can use standard hardware store ferrules (HOME DEPOT / LOWES) !!! But be sure to use the stiffener inside of the tube or the ferrules will not hold !!!

Propane is a way better choice , it is a liquid and only you be injecting the vapors from the tank . It would take a giant tank to get the same amount of usage as a Liquid Propane tank . Propane has an expansion rate of 270 to 1 . 1 gallon of Propane Liquid equals 270 gallons of vapors @ 2520...