Search results

I agree just rebuilt a Dodge with a Dana Axle new pins and bushings / or ball joints will more than likely repair the problem . Mine were shot hard to determine until removed for repairs.

Sorry about the delay I have some back issues going on now and don't feel up to crawling up to open the hood and get pictures. I can explain locations of the valves to you. The solenoid valve goes on the inlet side of the pump or heater which ever you want. It is wired to open as you start the...

**** it working that day again !!! only 1 1/2 years to go !!!!!

No , there welch plugs (casting plugs ) at front and rear on heads that most likely let go. Time to remove heads to investigate !!!!!

Those are what are known as drive rivets , drill the correct size hole are drive them in !!!! As for the leak I am betting it is a fuel line leak , I looked for days to find one . Could not stop it by tightening , I had to replace the HH . In stall new Orings while the head is off also . :beer:

May not sound like it could happen but you may want to check the intake (fuel ) heater for leaking through thinning out motor oil causing leaks

Welcome aboard from a member south of the Mason / Dixon (Ky.) :beer:

Trolley Gimp, I have a trolley if you cannot locate one . Just let me know if you are in need of using it .

BIG MO for mine

looks to me like old style head gaskets slobbering !!

May be slobber tube , lost piston or rings

You are correct !!!! I was thinking of the second design of steering on a 5 ton . The first design should be able to be adapted . A lot of moving parts to find a home for . But it should work fine.

I was going to use a five ton box also but turning right was going to be a major pain !!!!

Mine locking cap looks like a twin to that one and has always worked great !!! :doghead:

I have used it to help everthing from a pregnant whore to a fixed basketball game no problems yet !!!!! No, really great stuff has worked worderful for me .:beer:

I would replace the flasher relay unit . Left inner fender well . Should be plenty of used ones floating around . :shock:

Looks great to me !!! What part of the great state of Kentucky are from ? :beer:

Flame heater pictures Working strange shifts again !!!! I will post pictures ASAP., latter this week on off day.

Head Gaskets As far as holding pressure in the cooling system , mine will hold pressure for days . Leaking head gaskets:mine starting blowing compression (pressure) against the fire wall . Sounded like an exhaust leak. Progressively got worse after it started leaking. I found that during Gov...

5 ton steering box . I had one to install on mine , way too big and limited steering to the right . Plenty STRONG enough , just way too big for the 2 1/2 ton.