Search results

Seems all the options I've looked at are spendy, Isn't there any cheap portable or vehicle units that operate on at least one frequency that the RT524 uses? Legal would be nice. I only plan to use the radios running in convoy.

I need several new tires for my 939A2 series, They are all 14Rx20. Can I use 395/85R 20? I don't understand what the numbers mean, I understand the 20inch being the rim diameter, but the difference between 14 and 395/85 what is that?

I replaced all the solenoids in the PCU, Put the newer pressure switch on the PCU..... I usually have to hit emergency for a couple seconds and it will start inflating. It will inflate to about 45-50 lbs then I get a blast of decompression from the PCU vent. Then all lights flash. Couldn't get...

I'm not getting any starter solenoid thunk when hitting the start switch. I'm going down the TM troubleshooting list, battery switch is good, starter switch is good, I get the thunk from the PCB, have 24 volts to the solenoid. Want to skip ahead...... Can I bypass the solenoid somehow and apply...

Mine doesn't touch the oil anymore.

AWWWW Making love. Where humvees come from.

https://www.youtube.com/watch?v=e18jB7qcnGA

Just started watching the series on Natgeo while I walk the treadmill, have a bunch dvr'd. Lots of Humvee and other vehicle eye candy. Pretty good so far, I'm just starting part2. That is all.

Wondering what the ballpark is from UK or Eastern Europe to US east coast for say a 30,000 lb vehicle? I'm really getting the itch for some wheeled or tracked armor. The prices in the US are insane as far as I see.

Bought a TS-3991 cheap, listing said TS-3991/VRC USED WITH VRC-12 AND PRM-34 KIT. I can't make heads nor tales of what this box is supposed to do, even with the TM it came with. Anybody know? Is this used with another piece of testing equipment? Thanks!

Finally got around to starting my radio and vic-1 systems install. Thanks to JuanPrado got the taller bottom tray to fit the vic tray properly. Was putting off the installation to get the tach wired up. Didn't want to have to pull everything apart twice. RT524 and R442, Am1780 and command box...

I haven't checked my spindle nuts yet, but have new washers and 4 newer style nuts to replace once I start. What spindle nut socket fits these 8 notch nuts? I'm guessing a normal 4 notch socket will work but don't even know which one will fit them either. Suggestions where to purchase and which...

Hi guys: I'm installing an RT524A and R442, I know radio A (524) has to have the link in the 1029 mount in the direct setting, and radio B(442) normally has the mount 1898 link in the remote setting requiring Radio A to be on to use radio B. My question is can I put the link on the radio B...

I was watching a video on radio nerds on the VRC-12 series. I bought a RT524, but the RT246 looks really cool being able to preset 10 channels and press a button and have the radio dial the frequencies automatically. Was this problematic and why the military put a speaker in the panel instead of...

Do I need to support the body at the rear when changing from an A0 to A2 bumper? Or just do one side at a time leaving the opposite side still supported by the bracket or is it a non issue all together, just unbolt everything and install it? Couldn't find anything in the tm's about installing...

I came across somebody on eflea that was selling 10 packs of them by accident yesterday, now I can't find them using all kinds of searches. I'm going to start putting my radios in soon and could use some. Thanks, Wasn't sure whether to put this in the radio forums or here. Seems more appropriate...

I see the term combat rim thrown around, wth is the difference between that and regular rims on my 939A2 trucks? Sorry for the stupid question.

I had my HMMWV into the shop for exhaust work about a month and a half ago. They told me I needed a new idler arm and pitman arm. So i ordered them, it's going back in tomorrow to replace these. My left arm had a completely torn bicep tendon right before I took it in, so I can't work on anything...

https://youtu.be/e3Lspm190B4

Does anyone know what the supply voltage to and the output voltage from is on the PSU transducer on the 939A2 units? I'm looking for a low cost alternative to the crazy prices for the transducer.