Search results

Anyone know if M105 metal pieces will work with a M101? I know the metal bows can be adjusted for width to fit either by just bolting into the different holes. I am really curious about if the sides metal will work though as I have all those M105 sides, and there are some with bad wood.

I have never seen those before on any of the trucks I have inspected, so this is probably not a standard item that anyone would be able to give you measurements for. You need a 6" machinists caliper. They are cheap these days, and allow you to measure the inside and outside of many shapes...

I have one for sale that looks to never have been installed. It is te 10 bolt around the rim type. I won't be going to that rally, but I am right off of I95 if someone else is.

I got off late from work, but I was able to steel the alternator from my other truck in order to get the water pump to work. As per Westech's suggestion I added fresh gas to dissolve any gunk in the IP. I managed to get her running for almost 1/2 hour till it got dark. The idle is leveled out...

Ok I changed the oil filters, added additional fuel, and blew out the fuel lines as best as I could. It is still doing the same thing. I can get it to run, but I have to fight the throttle delay to keep in the right RPM. One thing that stood out is that due to improper instillation of the...

http://www.bunkerofdoom.com/mil/m35/m35schematic.gif This is OPCOM's site. Really well done.

http://www.occorp.com/?page=Pumps Poor little horse.

Ok I am thinking of plans for my newer Air Force truck. One of my first things I am looking at is perhaps removing the hardtop for a GMA insulated three color soft top. I already have the soft top frame, and really like the idea of a soft top for summer use. I have seen good reviews for the...

I just drained down the fuel filters to double check that. It looked like ok fuel coming out. It did not shoot out, but then again I might not have opened the drain all the way. One thing I did notice is that there is a dripping noise that sounds to be coming from the secondary filters. I...

nopics Well Video maybe. I want to see a filter explode :D Hope you get this fixed without too much trouble.

I have opened the top bleeder on the secondary filters, and fuel is coming out the bleeder. Some bubbles at first though. I am also getting fuel returning to the fuel tank. The fuel pump on this new deuce is super quiet compared to my 70. I am thinking it is not getting fuel to the IP...

I just got my new Air Force deuce home Monday, and I have been poking at it trying to get the engine to run. While it is a nice truck it was used a parts vehicle, so it is missing some things like the alternator which means no fan or water pump. This should not be a problem for short runs...

Are they bright enough?

Yahoo maps found it. It looks like it is just north of DC maybe 30miles. If I could clear out a few of these M105 sides in one trip I could drive up there for pickup. A better option for me is I live just right off of I95, and could met whomever. A final option is I may be going to this...

With the GL requesting EUCs for old purchases I am wondering if GL will find itself in a lurch if people do not comply. Now I have no real problem with filling out a EUC even though it is extra work which I feel I should be compensated for it. I do wonder if people are having any luck forcing GL...

I would say any way to get a copy of the letter posted here. This is VERY important to all of us, but if we don't know first hand with examples what is going on then we can't write informed letters to congressmen about this issue.

I have two deuce alternators that are just about new, but they both have the same stripped connector. From talking to the NG guys I hear this is a common problem. It is the terminal with the red connector on it. Does anyone know if that plate can be replaced or repaired?

RE: Need MV Would the big kids (me) be able to play on the NG helicopters? I might be able to do this if you would have use for my deuce. When would the dates be firmed up as I might have to get off of work?

Looks great. Could you post the manufacturer, part number, and price for the spacers. I might need a set for M116 trailer if I put Hummer rims on it.

Swinging them up and down is a one person job. Taking them off probably takes more. I personally am not a huge fan of the dropside with its screw down corners and such. Others love them as they are more useful.