Search results

You can find the brake light switch in the TM's which you can download from here. http://www.jatonkam35s.com/Links.htm You can also find lots more in there that you should know about your truck. BC

I think it will work. If I were doing it I would think about some sort of thick rubber donut washers between the skids and the pad to help minimize vabration. Maybe sandwich the skid between a couple of rubber "washers" on your bolts. Might help with noise resonance also. My2cents BC

Thank very much Speddmon, will do!! BC

OK electrical gurus, here is my situation and what I would like to do about it to get power from my 002a into the house. I have an older 3 wire main breaker panel but I am thinking about using a four wire cable from the genset as my next house (when I build it) will have a four wire panel. I...

Quote "now the turbo is out loosing brake fluid,"" Hmmm, that's a new one. Not quite sure what the fix is for that. BC

Another Newby jumping into the fray with no clue or forethoughtaua. BC

Or is the A1 a 427 multi?? BC

Thanks Chuck, I'll be looking for a proper motor. I'll check to see if the NAPA one mentioned will work. And you are correct, noise is not a problem. I just want heat and defrost!!! BC

ODdave, Here is a question I asked Stumps in another thread. Explains what has happened. "OK Stumps, Here is a question for you. I mounted my heater in the cab and the blower motor is positioned so the blower shaft is operating in a vertical position. Had some trouble so pulled the motor and...

spOOn, Keep looking on Ebay for some oddball slave plug adapter. I found this one for maybe 20 bucks. Got a24 volt mil spotlight with magnetic base with 20 or so feet of cord with no end on it for not much money either. I just put a Bendix connector on to connect to the one on the slave adapter...

ODdave, Do you know if that replacement blower motor has proper bearings to operate with the blower shaft operating in the vertical position as opposed to horizontally as it would in a normal heater installation in an A2?? I have my heater installed in the cab with the shaft vertical and now...

OK Stumps, Here is a question for you. I mounted my heater in the cab and the blower motor is positioned so the blower shaft is operating in a vertical position. Had some trouble so pulled the motor and fired it up in the vertical positiion. It works but jumps up and down. When I operate it in...

I don't know the answers to any of your questions, but they sure look like fun:D.

Beautiful truck sir[thumbzup]. BC

Me too, but no pic! BC:driver:

Here is a link some of you may be interested in. Cobra 29LTD ARMY 40 Channel Army Theme CB Radio BC

You are very welcome. Glad to be of assistance. I went through the cable searching myself a while ago. BC

Hey Varyag, Check your other thread about looking for that cable. I posted a link. BC

Varyag, I'm not sure if this is the cable you are looking for or not. Break Away Headset Cable, 3 Plug, VRC, Military - eBay (item 200384164470 end time Feb-06-11 19:16:18 PST) BC

Hey rongaudier, I see in your profile you are a pilot. Did they make you read the instruction manual before they let you fly it? I'll bet they did. Perhaps you should read the instruction manual for your "Deuce" before you take off in it. It could save your life and the lives of many others...