Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Not a problem Vinny as long as you & Linda still make it.
Ya gotta tell LT & the Jersey Crew it's gonna be nice and cool that weekend so Gilbert would be the ideal place to rest their bones & "Lil Angel" before heading the rest of the way home. [thumbzup]
I must be dreamin....
Gimppy, you sir never stop amazin me. Just about the time I think i've heard or seen it all, you throw a change-up.
Since when do you worry about anything until after it all goes to heii ? I was beginning to think your were totally fearless in your endevors and I was an...
AR,
I have this style on my truck now for 4 years and not one problem. Gave a couple to friends for their vehicles and they too have not had any problems. I put it on the ground cable, use it whenever the truck is sitting, hot weather, cold weather, dry weather, wet weather and it's always...
Ft.Meade, Chambersburg, Mechanicsburg, Anneville are all close, so you don't need to be running to the other side of the country to pick one up. Watch GL's listings for those sites and you'll start seeing ones ya like and ones ya don't.
Go to some shows and parades to get a closer look and...
My TC Lever boot and Trans.Shifter boot from JT both had the metal bands/rings with them.
If ya want to make your own than all ya need is to find the paterns. These came as part of the Artic Kits orginally, so maybe you can find something by looking in that direction.
The Best......
The best you can buy come from Jatonka....his are made from orginal paterns with the correct canvas material.. www.jatonkam35s.com
There's several of us on here that have them and I've never heard any complaints.......[thumbzup]
Another Reason to come..............
Just got word this will be going on Saturday right next door at the American Legon where the Tank sits...:grin:....
Just maybe.....
Go over the link that Koburn posted by Cranetruck, then take a good look at yours.
Most deuces coming out now have already been bypassed, but if yours hasn't, Cranetruck is the man to go to with questions.
2cents
Before you go pulling things apart, check the fuse on top of the pump.
It's under the little square cover on the top of the pump, but there's a short wire you need to be careful not to break when you check it out, so go easy when you open it up.
To check for flow, you can crack a fitting...
Honestly.........
This question has come up before and my advice is call some of the local truck repair garages in the Lehigh Valley and ask what their 'Hourly Rate' is.
When you hear that number, you'll then be able to decide if it's afforadable for you or not. Keep in mind that no tow...
Questions
1. Did you fill the filters before installing them?
2.Did you turn on the master switch and let the pump run for a while before bleeding or turning the engine over?
3.Can you hear your in tank pump humming to indicate it's pumping?
If that's all that important to ya, your better off talking to them. They'll spend all day on the phone with ya, answering all the technical questions you can come up with.
This is a good company with a good product....if you need to hear more, than give em a call.
Mike, just use the gasket as a template and make one.
Or go to any truck dealer that installs dump bodies or hydraulic accessories and they should be able to get you one.
They are for the most part kinda standard size, the number of holes differs on some trans..
Check these folks too...
Yep...
If you ask for 'Matching Cases' that's what you'll get.
The set I have now are matching BFGoodrich All Terrain T/A's and the other two sets were Michelins. They asked what type vehicle I was putting them on and sent correct cases for the vehicle.
As a matter of fact, the set I...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!