Search results

Hey scooter, you going to Lowell on the 8th?? Maybe if the weather isn't too bad I'll run down in the deuce. BC

Oh TJ, I'll have to come to Tampa again and meet the other white meat:wink: BC

CARNAC, I wanted my box to be readily accessible, so I made up a bracket and put it under the dash. Have an extension cable for the headset so I can wear it while driving or be out of the truck on the pass side to operate the radio which is mounted under the seat. Didn't want to lose the bench...

Clean and lube the plastic ones and then install a small plastic or metal air valve (a fuel shutoff valve for snowblower, rototiller etc. will work) into the drivers side wiper line. Get the passenger one operating at the speed you want and then slow the driver's side down with the valve. I had...

Put your coolant heater in the cab. You get way more heat quicker. By the time truck is up to operating temp, cab is nice and warm. BC

Just out of curiosity, what were your RPMs at 63MPH? BC

Get the wiring diagram out, troubleshooting procedure out, your multimeter out and go at it very systematically until you find the problem. You will find it faster than "shooting from the hip" and checking things randomly without knowing what is supposed to be what and what goes where...

Check to see if the NSN'S for the filters are the same for the 03 as the 02? That shouldn't be too difficult to find I wouldn't think. BC

joesco, I've been running on road diesel and junkyard very bad gas that I filter twice through regular in line fuel filters. The gas is not particularly dirty, just very old. I then add cheap 30wt oil at about 20:1. No UMO though. Truck runs great and starts right up. Plenty of power also. The...

Mike, I understand that. I was making a lame attempt at humor I guess about all the brouhaha over the CUCV key code business that goes on here every so often. I'll refrain from bad humor from now on:-D. BC

And how about all the Deuces and 5 tons that don't have keys. What's that key code again:-D? BC

Many thanks to papercu. He offered up a CD copy. I love this Forum:-D. BC

Bump

I understand what you are saying Sephirothq. I guess it depends on how one interprets his somewhat ambiguous description of the problem. I see it that the circumfrence of a cross section of the trailer lunette is too big to fit into the Deuce pintle. If in fact the center hole of the lunette is...

If you downsize your lunette, just make sure it is rugged enough to withstand the combined weight of the trailer and expected load. BC

Next question, does anyone have an electronic copy of the TM for the 4a032 engine they could pass on to me. Thanks, BC

No I haven't DH. I'll check over there. Thanks, BC

Does anybody know if the forum has hidden anywhere instructions on how to install the electronic ignition upgrade on the MEP 016a gensets? Or does anyone have a set of instructions they would like to share with me? Thanks much, BC:-D

You're right Bjorn, a new sticker might be in order when you get the ole' Cranetruck up and about again:-D. BC

I would say it is certainly worth the ride. BC