Search results

I’ve been on the lookout for a 420 or 430 loader for my old JD reactor.

This. 100%

Go slow and make sure you don't have other problems. When you get known good batteries in there see if it will bump over with the dead crank switch. Before doing that see if you can spin the engine over by hand.

OK. High probability the computer has a problem. They use a big jump box to try and start the units. Since they couldn't get the hours off the screen it means the display didn't light up when they tried to jump it.

I assume you recently picked it up from Butner? Is it this one? https://www.govplanet.com/for-sale/Generators-and-Power-Equipment-2014-Cummins-Power-Generation-MEP-1040-Generator-Set-North-Carolina/10499863?h=5000%2Csm%7C1%2Ck%7Cmep1040%2Csort%7Cd+asc%2Cmf%7C1&rr=0.5&hitprm=&pnLink=yes

Sounds like it’s going to require the DCS to be removed and inspected internally for damage.

Here in NC when you go to complete the purchase you now have the option for the SF97 or a NCDMV Title. If I remember correctly having them provide the title is like $200 over the cost of the SF97. If I take the SF97 and get it myself its $25. There are road use tax on top of that which you have...

I was going to ask that, as cheap as buck converters are, can you use one of those?

Dude, that exhaust pipe made me giggle. Not in a bad way. I was laughing because its something like I would do. :D

You can run off a single battery but it’s not best practice since it can lead to a charge imbalance between the batteries.

I have a few in the que to get fixed up and go for adoption. After that I expect to be done with them for a while.

A number of us have been squealing about the cost and availability of generators for a while now. Its gotten almost impossible to offer these machines to users for a reasonable cost. I pretty much throw a number down and don't worry whether I get it or not. I'm not getting into any kind of a...

Are you holding it in "START" till you see oil pressure registering on the gauge? This isn't like other machines where you release the START switch as soon as it fires off. You have to hold it in START till its running and it is registering oil pressure. Otherwise it will shutdown.

How was load measured? The onboard load meter or with an external amp meter?

Don’t think we have enough info to say. How many hours on the set? Can we get more history? Is this a new problem?

That sucks. Hope you can find something to get you going again.

As easy as the pumps are to disassemble and clean by hand, I'd recommend doing that. Getting them out of the machine is the hardest part. Do NOT use anything abrasive to clean them. Lots of clean rags and some carb cleaner is all you need. You want to avoid scratching any of the internal...

Pretty normal dissimilar metals type corrosion. Waterpump is a good guess on source. I had one come through with some serious cooling system issues. The coolant had jelled. I did a couple of plain water flushes then ran some cooling system cleaner through ti. When I rinsed it out, everything...

I thought about using the TIG. I'll need to practice a bit to get my heat control dialed in. I have some brazing rods.

Well crap. I've confirmed the wire is brazed and not soldered on there. I don't have the appropriate torch setup for that. :(