Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
my 24v winch(s) are 18k. My concern with bush-winch is that all the stuff that holds axle in place.... and wheels in place etc....are really not made for forces being tugged that way. Maybe its not a sound concern though.
plan ahead.... build jack points in... dont bury yourself that much.... and/ orrrrrrr... plan on digging. understand the cribbing/foot print issue.
Guess this adds another advantage to the idea of putting small 1k? winches at each axle corner on chassis to pull axle up with.. then all...
is it a brass nut that 24v flows thru.... or ?? if not maybe just take the unit to a big tractor supply or Ace hardware so you can matched the bolt to a nut they have...... and buy the needed nut?
for stuck.... here is a non anchor potential solution
chain up axle. Jack it up with tires above earth as much as you can. Jack placed in a way you dont care if it falls off jack. Use winch to pull that end sideways with goal of when it falls off jack that tires ends up a good bit to one side...
you sir got a Christmas Miracle. Don't recall S.Stevens ever helping anyone.
Transmission HAS to see a good clean 24v or it won't work. On A0's there is a known issue with older ones where the wire that excites (tells it to activate) the alternator that runs from the oil pressure switch on the...
the statement above of very wide span of charging input being additive ..... not really true in reality. brief explanation that says it way better than I did earlier.. from https://shop.pkys.com/multiple-charge-sources
Lets assume the battery is quite depleted. The solar panels haven't...
Solarizer/Pusetech sells many products. The more expensive ones actually do charge also.
. the pulse (of any desulfator) ..... effect on regulators, charge controllers etc..... good question. So far all the post are fuzzy here
. multiple chargers (no matter the type device)... my understanding...
Versions of this cab used on many trucks on other side of the pond so yes one or more of them likely have rear window. More cost effective though to just cut it out and have a flat automotive glass cut for it and use generic window rubber and or cut out metal and glass from a slightly smaller...
- 6 figures.. hope they are not fat slobs....
- heck others get 72 virgins.... granted they must be very ugly to still be virgin's or just flipped the adult card (and maybe still ugly?)
hmmm.... issue is...... G-forces..... there is a significant reason centrifuges are heavy as shiat.... if the spinning parts break.... they launch it's ever growing armor piercing shrapnel like an IED thru the casing and can kill anyone around in 360. This is why they have thick wall casings...
anyone else finding that all the sudden when you click to open a thread listed on screen.. it no longer takes you to the page where the newest post you have not read resides.. but instead takes you to the very beginning of the thread..... which can be pages and pages and pages away from where...
more like business competitive slight of hand. Yes inflation up..... but they dont raise the price of item to offset it.... the low price online attracts you to their product page and that is priority. Increase is added to their listed shipping cost but hidden-ish from view until last page...