• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    New M54A2 owner

    Get a box end wrench that fits. Heat and bend the handle 90 degrees cut the handle and weld a 1/2" drive extension to the cut wrench handle. Oh, use the box end, not the open end. Previous older thread has this information.
  2. G

    Using thicker oil

    I suggest using 40wt diesel oil AFTER you check oil pump and relief valve. Oil analysis is a good idea for longer term information.
  3. G

    Piston pin fit. How tight is too tight.

    Try warming the pistons in a hot water bath. The pins should go in without undue force.
  4. G

    How to fireproof magnesium parts?

    Thanks for the EV fire information. I'll pass it on at the next VFD meeting.
  5. G

    Steering wheel chain

    I'd leave it and kick the chain under the seat when driving. Use it for parking to keep the pinheads away. Get 3 keyed alike padlocks. Use one for the steering wheel, one for the spare tire carrier, and the last on the hood chain if you have such.
  6. G

    10 Ton M123 Line Up

    Wow, a serious big iron collector!
  7. G

    Cooling System Mystery

    I guess that old 2 part cooling system flush isn't around any more. I cleaned a lot of rusty mud out of my M37 cooling system when I got it home.
  8. G

    Cooling System Mystery

    I suggest removing a core plug in the block you can get to. It would be informative to see what has settled there.
  9. G

    Deuce Master Cylinder

    How about you drill and tap the plastic cap for a vent?
  10. G

    MEP-803a success story

    You made a good score. Good write up and photos.
  11. G

    M37 fuel tank

    I had excellent results with KBS brand coatings. It sets up and stays somewhat flexible as not to flake off.
  12. G

    M37 fuel tank

    A little flash rust is fine. You can use Ospho or similar on it for a protective coating. Then use your tank coating as per instructions.
  13. G

    Air horn setup?

    I love that sound! Very effective for alerting distracted drivers. May cause them to drop their cell phones.
  14. G

    M139 Gasser engine or multi-fuel?

    That's kind of a rarity. Bridge truck?
  15. G

    Will start only with a squirt of starting fluid. Runs great once started.

    Ford 6.9 and 7.3 IDI diesels run great ATF. Cummins 5.9s do as well.
  16. G

    Is this wheel unusable?

    No, I can rarely hear it. Cold clear winter nights I can hear a little engine noise. Those engines are really old but still running.
  17. G

    My first multifuel?

    You are doing a wonderful job. I loved your gear lube pump. Saves a lot of frustration.
  18. G

    Is this wheel unusable?

    I remember that. Those were the days in Austin when you could get to work in 5minutes. Later, I sure enough got out.
  19. G

    What fluid goes here?

    You can download the -10 operator's manual on this site. It will help you a lot.
  20. G

    M813 Seized Engine

    You can download manuals for your truck on this site. Good references with pictures.
113,121members
166,490threads
2,344,699posts
981online users
Top