Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
If you are lucky enough to have just a cooked relay, they are fairly easy to swap out (use a good pencil type soldering iron). If an ic is cooked, it will be far easier to just source another heater. The only good thing about all the heaters that came out without control heads is the...
As I said, I make them and sell them both here and on ebay. And yes, the white wires are positive and the black are negative. It needs two batteries to work properly. If you hook both sets of leads to one battery, it will cause a short when the heater tries to switch the batterypacks for...
That looks like the pressure cutoff switch for the ctis. If it is, its role is to prevent the ctis from kicking on unless a minimum pressure (I think its 75 psi or thereabouts) is in the air tanks. If not, the only other pressure switches on the system would be for the low air warning, and I...
The holes on the side just behind the soft door bead retainer are from the hard top kit-- I have one on my A2. Do you have similar holes along the top edge of the w/s frame? Or along the back edge of the rear body?
Can those dual bank noco chargers in fact be hooked up in series (one bank to each battery) without issue? Or do you need to disconnect the batteries first?
Are you talking about becoming an agent or an underwriter--- if its the latter, be ready for a shock. I am no expert by any means, but typically underwriters have to keep buku amounts of money held in some form or another to cover the policies they underwrite. Couple that with all the regulatory...