Search results

I am sure some have done 4l80 conversions to 6.2L HMMWVs I am in need to add a TPS (throttle position sensor) to my 6.2L and know there are many ways to do this, they make "universal" cable operated TPS units as well as ones designed to attach to the gas pedal/linkage under the dash. So I was...

Is this a typo and pictorial error or is there a 6th type wheel for the HMMWV?

TOBASH, who is a regular contributor here has not logged in since Aug 7th, if anyone knows him personally then maybe it's time to check up on him!

Edit see second video

Evidently Arnold can title a HMMWV in CA!

EDIT, as you read this thread I ended up using a 6L80 as the 6L90 was toast and the 6L80 has the same output shaft as the 4L80/3L80. I was at a machine shop auction the other day and picked up a 6L90 with a MP1626XHD transfer case, it is complete with T/C, the front shaft, cooler lines and shift...

I guess My DuraVee project fits both the Hot Rodding and Modification. I have finished a Duramax conversion on my M-998 #2 and will start next week installing a custom hard top and a S-788 shelter which will be Modified into a camper, including A/C and a 3KW diesel gen set. I will post things as...

I had priced Hagerty ins. direct online, then I went to N. Devin Ransom at yourmrinsurance.com, He is touted as being an MV insurance expert. He hooked me up with a Texas agency and I was quoted the same policy for substantially less. I have no association with anyone with ether company.

I did a search and did not find the answer, I am sure I am not the first to ask this though. It seems to be common wisdom that the BASIC lower ball joints can be upgraded to the later type with the 7/16 bolts, but what about the upper ball joints? can the older upper A frames accept the upper...

When I rebuilt my fuel tank I decided to go with the fuel sending unit that did not have the float arm, I thought it would be handy with all the mods I had to make for the Duramax install not to have to worry about the float arm, as it turns out that sending unit is what is called a reed switch...

So how does one go about assigning a replacement value? is it just something "made up" or is there a "place" one can go. I have two M998 Hmmwv trucks, the first one is a 1992 6.2L/3sp helmet top, with new high back seats, custom front bumper brush guard and winch mount, which is much better IMHO...

Is the basic and later A2 steering wheel the same size only "thicker"?

While it was not the failure I was thinking about when I decided to "test" one of the Autozone half shafts on the DuraVee, the dang boot just came loose as it must not have been installed correctly, this was only after 45 miles at no more than 70MPH, what a mess!!! good thing they have a...

I was surprised that several searches about insurance came up with squat. I am curious about what companies you are using? How does one go about getting an estimated value? Any claims????? and how they were resolved?? THANKS!! Actually one company I had used many years ago (Hagerty) with my...

I may be crazy but I thought there were "skinny grease gun tips" available that could get into places like the front U joint on a HMMWV but I cannot find any..

Are all HMMWV turbo engines GEP manufacture?

I have a NOS factory turbo doghouse without the fasteners attached, it looks like I can use all but the brackets on the rear for the elastic retainers, this part # looks like 12469276, is there any other hardware that will not swap over? I do have the turbo seal. I am talking about #24 in this...

Not sure where to start with this hood as I have no idea what it was used on, it has U. S. markings on the side.

I cannot find them in the TM 9-2320-280-24P 1 or 2

Is the 6.5L reverse rotation fan the same dia. as the 6.2L fan? and it looks like it they both use the same clutch yes?