Search results

To be honest I'm still trying to figure out part numbers so I know what I have. I have a bunch of gaskets which I believe is for the M37, and M211. They are mostly Felpro brand and all look good. I have tons of spark plugs, some seals, carb rebuild kits for the m211, M715, and a few brand new...

I have a brand new in the unopened box REB kit for the M211/ M135 truck. I am cleaning out some of my spare parts that I won't use or don't need and the price is $400 for the kit plus shipping. Memphis Equipment sells them for 417 plus shipping, plus a $50 core charge where you have to send in...

DR, I'm asking between $75-100 for my 11.00x20's with tube and flap included with them. They are all 80% and up tread. I wouldn't part with them, but I don't need all of them and would rather someone who could use them buy them. I have 6 very good 80% 11.00x20 on 5ton rims that I don't...

I assume you are talking about the plate that is on top and houses the two cone shaped rubber travel stops. I do have one of those around that I could sell you or you could buy the complete front axle too. Email me at troykluthe@hotmail.com.

I have about 7 carb rebuild kits and 1 dist gasket for the M715 jeep that I would like to sell if anyone is interested. Please email me.

If I get this right you said you are paying $50 each tire for 50% tread on them???? I have 80%+ tires that I want to sell in 11.00x20. South Dakota might be too far away, but if anyone else wants a crack at them I would like to sell about 15-20 tires. I have way too many and I can't use them...

We should have a spot where we can type in the NSN of a part or search for the part and get the NSN and other parts numbers. It would also be nice to have the truck part and corresponding NAPA part numbers for items. Everyone could just add the info they have and we could have a really nice...

This might not be the right forum, but I was wondering what a NOS carburator for an M37 is worth? I have a few NOS parts laying around and might start to do some cleaning? Thanks.

What are the gas tanks on the m211 made of? Is it stainless steel or just galvanized steel? I have a small hole that I need to weld shut and need to know what it is for sure. How have you guys cleaned your tanks out? mine has light rust from old varnished gas in it. I've cleaned twice with...

My tailgate looks like the later style, it just flops down and has the footman loops. It's possible that it was upgraded in the service to the newer style. I would like to see a pic of yours as I have never heard of anything like that.

I was wondering what the 5 ton wreckers are worth? There is a 1957 5 ton international for sale locally on auction, but it's pretty rough. It does not run, but everything looks like it is there. The front winch is missing cable, and the whole truck is pretty rusty, bent up, very greasy, and...

The only reason I was wondering is because my 1951 M135 has a serial number of 082. Production started Sept of 1951 and mine is dated October 1951. As far as I have found, mine is the lowest serial number that survives? Someone correct me if they know of one lower please. I don't plan to...

I bought a set of used peltor litecom headsets and they definately make communication good while driving. I can't belive how well they block out sound. The only problem is they act up from time to time and don't work right and the 1/4 mile range is more like 21/2 blocks in a straight line...

I was just wondering if the serial number on a deuce means anything value wise. I know a gun or corvette with low serial number is worth way more than a higher one? Does anybody know if a very low serial number deuce is worth a bunch? Also does anybody know the NAPA number for the seal on the...

Not sure if this could be part, but possibly your fuel pump is not providing the right pressure. I think it is between 2-3psi, the manual has that in there. I would definately take your fuel pump hanger out of the tank if you haven't done that already and clean the heck out of it. I've never...

hey guys, I'm looking into building a pole shed shop and storage for my 2 deuces and parts. here is my question. What is the maximum height of the deuce with canvas and bows? I have an M211, but it's basically the same truck as an m35. I want to make sure the door to the shop will be...

Ok, what I wanted to know is what is the difference between dextron II and Dextron III? Memphis Equipment recommends Dextron II, but all I can ever find is dextron III in the stores? Any ideas on this like what the difference is or if they are basically the same?. Also, does anyone have a...

All I can say is that im jealous!! :turn: How much did that one set you back? You sure did get the luck of the draw.

I am about 98% sure I have one with my spare parts. I can't get to it before tuesday because of the heavy rain we just got and it is way too muddy to get out there. Email me and I'll let you know how much if you are still interested. Thanks.

Is there anywhere I can download this manual for free? I didn't see it in the SS library. Thanks.