• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Guyfang

    MEP803A glow plug system questions - intake heaters

    I took that therapy for 20+ years. Then eight more as a contractor. Works wonders.
  2. Guyfang

    D298ER mep005 "smokin"

    Wet with what? Fuel or oil? If the oil looks and smells like fuel, the injector pump is leaking fuel into the oil. The oil level goes up, and at some point you have oil/fuel in the jugs.
  3. Guyfang

    FLU419 electrical issues

    The click you hear is maybe one of these relays. Ad a click is not assurance that it works. 1. KBI Sensor switch. 2. Starter lock out. 3. Starter Repeat Lock out.
  4. Guyfang

    MEP003A Rectifier Board Burn Up

    What you should do is start your own thread. This one is two years old and never completed anyway.
  5. Guyfang

    MEP803A glow plug system questions - intake heaters

    Find the threads that discus rodent proofing. Read a few. LITD has one, and there must be 10 more. Or you will be seeing more of mister mouse.
  6. Guyfang

    Input requested - MEP-802A/803A Radiators

    What gen set? Look at the LO for the gen set that you are thinking about. And also keep in mind that there are ways to test coolant to see if its still good.
  7. Guyfang

    Converting a 005A with a Digital Controller

    And now you know why the Army went to plastic tanks!!
  8. Guyfang

    MEP-006A Need advice

    You need to stop thinks about the main gen. That can not be the trouble.
  9. Guyfang

    MEP-803 fuel pump does not run

    Close enough for Government work!
  10. Guyfang

    New to the stable. M-54 gasser

    Tank and pump unit
  11. Guyfang

    MEP-003a No voltage

    Terry, Please start your own thread. Very few people will look at this old thread, as it has several hundred posts. You get better exposure if you start your own thread. If you need help, tell me.
  12. Guyfang

    looking for access cover

    My computer crashed and while restoring files. I found that document. I am finding lost of stuff I did not know about.......
  13. Guyfang

    Voltage Regulator replacement MEP-003A

    Disconnect the wires from CT1-C, 1&2. Then measure for continuity on the CT1-c connections. If you have good continuity, the CT is good.
  14. Guyfang

    looking for access cover

    Norm, is this what you are talking about?
  15. Guyfang

    Slant Back Truck Bed Rack

    UFO, please write the state you live in, in the location block. Thanks.
  16. Guyfang

    MEP-006A Need advice

    Thanks - I've had the same worry. I got the voltage regulator on eBay ("new old stock"). The number matched 6110-00-030-7815 (Was the new regulator new in the org box? Look at the part number on the VR chassis, and the VR card on top, to see if they match the -24P. Do you also understand the...
  17. Guyfang

    MEP-002A, will Start, Run then dies....any suggestions?

    With no load and Calif. temps, nothing to worry.
  18. Guyfang

    MEP-006A Need advice

    Hello all - I'm new to the site and it seems like a tremendous resource. I recently purchased a MEP-006A on GovPlanet. After replacing the day tank fuel float the engine starts and runs beautifully. I am having an issue where the generator does not make power. The symptoms are identical to...
  19. Guyfang

    Trailer Size?

    I watched a soldier get catapolted over a PU set one day. He was not hurt toooooooo bad, so I can still laugh. He had just take a front gen set off the trailer. He was standing on the lunett, and his good buddy opend the trailer hitch up, then pulled the truck forwards to park it back on line...
  20. Guyfang

    Trailer Size?

    About that rear leg. The first time you have the trailer unhooked and forget about that leg, is when you walk to the rear of the trailer and the world goes up. :ROFLMAO:
Top