Search results

I have a couple 50' jumper cables I might be selling soon.

You need to make the trip. I think I have a couple of the 2 pin.

I think my parts truck has a spring seat, I will check.

Just tried again. I noticed this line at the top of the page. Sorry, but the maximum filesize for all Attachments in your Private Message Folder has been reached. Please delete some of your received/sent Attachments.

Well maybe it is just me but I have tried to post pic's in PM's but they will not attach. I use the same process as in normal posts.

On the PM questions. Why can't I send PIC's in my PM's? I can post PIC’s in the forums but not in PM’s.

I have one ring left. It is missing the felt and the band that goes around the cover but spins good. I am trying to blast my legs and get them painted before I put my ring back on. Did you get the pic of the tires?

RE: Nice job! I still need to paint the underside of the bed and a few odds and ends. I will need to replace most of my gauges. I taped them off but not good enough. Sand still got to the glass when blasting and frosted them and then I also used lacquer thinner and it clouded the ones with...

RE: Nice job! http://mvdataplates.com/. They were a little pricy but help with the look to finish it off.

PIC DSC00039 shows the rim with the center removed on the lathe. I could have done it with a torch and grinder but for $20.00 per rim I could not pass it up.

Here are the tires I am running now.

I sold off my first set of rims and 15.5's. I made a second set of rims the same was as the first set but did not balance the rims like before. I did take the rims to a buddy that has a large lathe to cut the centers out of them. I have Goodyear 395’s on the front and Michelin 395’s on the...

Well I took it on a 100 mile trip. Other than the SAND comming out from everywhere it was ok. One hub getting hot but it is the one I replaced the bearings in so maybe too tight. I ran out of sand and still have some small parts to finish up.

Mine has one long and one short cable. Short one is grounded to one of the bolts on the plug. I have a couple others that are the same way.

I picked up about 50 yesterday and had set them down to get some other parts to include a 50' NATO cable. Walked out and forgot the sheer pins. All gone this morning.

Look at the first page in the post. 5th pic down shows the lockout hub.

Overson lockout hubs on the front. I did not tape anything. Sandblasted and painted. Anything with bearings or openings I trued not to blast direct. I need to get some new pic's up.

I need some M715 feet if someone is in the trading mood.

I have a set of chain strapes for $120.00 shipped. From time to time I can find the pins. 3/4 pins are harder to find than 1" for me. I have some 1" X 3/4" feet and some ?? 1 1/4 X ( 3/4 and 1") on other end.

Re: part I did that when I unhooked a civi trailer that I had riged a plug on. I had several cars passing and pointing. I have a couple used plug cords if you still need one.