• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. sermis

    Dodge tanker, what is it

    I was able to talk to the guy today. Said the title has been missing for 3 years now and that is why they have not done anything with it. Not sure as a title is not that hard to get. They are still not sure what they are going to do with it. If it sales it will be through an auction and...
  2. sermis

    Ouverson lockout hubs water leak

    Re: RE: Overson lockout hubs water leak Yes the inside bearing was ok and as I got into the hub the grease was less and less contaminated. I am going to check the oil in the pumpkin and see if it is ok but I don’t see how it could have gotten to the outer bearing if it came in that way. A...
  3. sermis

    Ouverson lockout hubs water leak

    Well I am almost ready to start painting. After I pilled the wheels off I noticed that one f the boots was torn. The axel stop bolt punched a hole in it. Spinning the hub I noticed that the bearing was making noise. This is the bearings I just replaced about 6 months ago. It is the front...
  4. sermis

    Axle breather assembly

    I put a piece of steel mesh pot-scrubber material in the open end and secured it with a cotter pin. Might want to get the copper stuff as most of the steel will rust is it stays damp.
  5. sermis

    Front fenders

    What is the going rate for a set of good used front fenders? Mine have some patch jobs and are tweaked a bit. Do I try to straighten them or just replace?
  6. sermis

    Hot front tires

    Have you checked the front end alignment?
  7. sermis

    Submitting an ad with pictures.....

    RE: ad I tried about a week ago to post an add. It stiil says You have 1 Queued ads. Maybe it's not you.
  8. sermis

    Westy's 813 recovery

    Nobody snapped on the duct tape.
  9. sermis

    Getting ready to paint

    Well the jack stands under the front are 7 ton. Not sure if they are military but that is where I got them. They were rotated out due to the 07 inspection expiration. Now the orange jobbie in the rear is a Harbor Freight one. The front ones were tweaked a little but fixable. Does not look...
  10. sermis

    Getting ready to paint

    RE: plywood I know better but did not take the time and know have to pay the price.
  11. sermis

    Getting ready to paint

    Well I am coming down the driveway and my son states "WHAT HAPPENED TO THE DEUCE". I would have never thought that 7/10's" of rain would have softened the ground enough to cause this.
  12. sermis

    Lockout choice

    Overson, seal better. Hot Rod Deuce has them. My seletros on my m725 seep oil, the M35 oversons dont.
  13. sermis

    Need Lug Wrench

    I have 3 that I will part with. 2 extra and my personal. I am not running duels so really don’t need one right now. If I get more I will post up. I have PM'ed the lucky winners.
  14. sermis

    Combat rims ????

    I still have 7 of the the16 bolt HEMET w/ bead locks. Bead locks will not work with lock ring wheels due to the tube.
  15. sermis

    Looking for body mount

    I think I got mine from 4 wheel drive. Used to mount fiberglass bodies. JC Whitney has it. You can also go to a boat dealer, they use it for roller bumpers.
  16. sermis

    Need Lug Wrench

    I have a couple of the gear reduction wrenches left. $50 + ride.
  17. sermis

    Looking for body mount

    I used the 2' stick of rubber and cut them on a table saw. I would stay away from NOS as they are old and will crack and give up. You might want to use the poly mounts for a jeep if you are willing the spend the $$$.
  18. sermis

    Getting ready to paint

    Looks more like it is getting stripped for scrap than ready to paint.
  19. sermis

    Getting ready to paint

    RE: 15.5 versus 12.5 I need some sandblaster parts. I have a Schmidt 3.5CF 300# pot. Need the seal for the top. Anybody know where to get one? Opinions on blast media and size.
  20. sermis

    900 series windshield

    If it will work for for what I want to do on the M725 I might be in the market.
Top