• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M35A2-AZ

    Utah - Smith & Edwards And Boyce

    I looked around a little, but does Smith & Edwards have a web site? Thanks!
  2. M35A2-AZ

    Engine oil in accumulator tanks?

    I get a little oil in one of my air tanks also. A little is ok. It comes from the air compressor. If you are getting a lot of oil you may check your filter on the compressor or your compressor my be going bad. If your filter is stopped up the compressor pull in oil. I read this in a thread...
  3. M35A2-AZ

    Which heat nozzle should I buy for my torch?

    Being a welder and fab guy. You need a small one and a mid size and if you like toys go for a big one also. But if you just need one I would get a mid size. Good luck!![thumbzup]
  4. M35A2-AZ

    Starter Solenoid

    Warthog, Thanks for the info. It looks like you unscrew it from the Solenoid and then the yoke out and drive out the pin. Thanks again!!
  5. M35A2-AZ

    Starter Solenoid

    AZdeuce, Not much under the orange rubber. The manual just says to replace the starter. I will look at it more today. Thanks.
  6. M35A2-AZ

    Starter Solenoid

    I need to repair my Solenoid copper plate, but I can not get the Solenoid rod unhooked from the starter yoke. See pic. It looks like it has a pin in it, but there is not way to punch the pin out.
  7. M35A2-AZ

    Towing A M105 Trailer?

    I did the same thing.
  8. M35A2-AZ

    M35A2 transmission problem

    Good eye!!!![thumbzup]
  9. M35A2-AZ

    M35A2 transmission problem

    My monitor is not that good or is my eyes???:-)
  10. M35A2-AZ

    Measurements of M35A2 and M109A3

    I think I saw a thread about someone making a 4 door M35. Try a search in the hot rod and Mod.
  11. M35A2-AZ

    Measurements of M35A2 and M109A3

    For the M35A2 with stock tires the numbers are good. The M109A3 is the same, but it maybe a little taller I think. Good Luck!
  12. M35A2-AZ

    My first MV and a thanks to the member that sold her to me.

    Welcome to the sickness and you can not stop with just one!!![thumbzup] I tried just one, but I had to have more.
  13. M35A2-AZ

    Axle leaking

    Thanks to all for all the ideas!![thumbzup]
  14. M35A2-AZ

    Axle leaking

    OD, Sorry I did not let you know about it. Did not think you would come up for it.
  15. M35A2-AZ

    Axle leaking

    Hated to miss it!!!:-(
  16. M35A2-AZ

    M105wheels on a m101a1?

    That has got to be the best thing I have seen all day!!!!rofl
  17. M35A2-AZ

    Axle leaking

    Kenny, Any and all inputs are always welcome!!!![thumbzup] Thanks!!
  18. M35A2-AZ

    Axle leaking

    Kenny, Thanks, Do you use it on the hub seal also and not use the paper gasket? Thanks[thumbzup]
  19. M35A2-AZ

    Axle leaking

    4x4 Forever, My wife got me that for Christmas during my long EUC wait to pick up my truck. I worked on the model off and on for two weeks. That was the first model I had done in maybe 35 years or more. It is a 1/35th scale. Amazon.com: AFV Club Models 1/35 M35A2 A 1/2T Cargo Truck (Limited...
  20. M35A2-AZ

    Finally "Done"

    Very nice job!!!!!!!!![thumbzup]
Top