Search results

Very Nice Job!!!!![thumbzup]:grin:

cookeemann, I sent you a pm about the bed. Thanks!

ODw/envy, My dad would say the same thing!! Tinwoodsman, The long 1/4" idea work great, but I did not have a 9/16" 1/4" drive, But I got it with a 3/8" drive. Well I got it out after sleeping on it last night. The problem was the plugs on the side of the MC. It was stop the MC from going...

I have read a number of threads about the remote brake fluid reservoir and I liked the idea. But I have a question, do you still need to add a vent line? I know you can not use the vent that was on the MC.

That is good to know about the towbar![thumbzup]

Thanks I will give that a try with bolt. But why can I not get the MC out of were it is setting?:(

My MC has been linking so I started taking it out. Got it all on bolted and ready to pull out, but I have turned, pulled, pushed and I can not get it out. The hole in the cross minder has a rolled in hole in it and it is hanging up on the rolled part of the hole. Is there something I am not...

Good idea!! Thanks!! I guess there would be no way to tell who made it of the three manufacturers.

I have a m35a2 that the data plate is missing off the motor and I to was hoping to find out what motor it is.

Fastnova, When I checked it they were dead also. Great truck!!!:beer:

Fastnova, I looked at that truck in Barstow for a SS member when I was there picking up my A3 and it was a nice truck, looked very clean.[thumbzup]

Thanks guys for all the info. and ideas for the battery tender!!!![thumbzup]

I have read some threads about using a Battery Tender on the batteries, but would it be better two use two 12v tenders or one 24v tender? Thanks!

Good write up and great road trip[thumbzup] Good road trips are always fun!!! Great looking truck!!

It was happening to me also, I was thinking something happen to my computer.:cookoo:

harleyrkc, It worked very well. I used a little weatherstripping glue on the ends and a spot in the middle to hold it in place till I got it screwed down.

I did find some round seal from McMaster-carr, see link I used it and it worked great, but you have to buy 100ft of it. It runs about .21ft. So I have a lot lift over. McMaster-Carr

I have been welding for a long time and welding galvanized metal is very bad for you. I use a respirator when I weld and/or do griding.

Welcome from AZ. [thumbzup]

Great story and road trip!!![thumbzup]:driver: