Search results

On the gas motors the rods went from the transfer case to the motor mounts I have a set in one of my parts piles , I don't know if they will work with a diesel.

m35a2 driver seat New seat install in the deuce!! MRAP Seats in a deuce or 5 ton? Slight upgrade to stock seats during reupholstery Deuce air ride seat?

There was also a upgrade to a air operated switch so it may be in the air line at the air-pack . If it still has the hydraulic operated switch you should probably upgrade to the air switch. Erik's Military Surplus has the kits. http://www.eriksmilitarysurplus.com/brliairopswu.html A thread on...

Post #10 of this thread has a picture of the switch , it also has info on testing the switch . brake lights not workingFYI this thread is listed at the bottom of this page under similar threads .

Has the emergency shut-off been pulled or moved while you were working on it ? It needs to be reset manually if it was.

They work just fine when the motor is run the way it was designed to run.

Sounds like it's time to pull the heads , aluminum melts at a little over 1200* degrees you probably burned a hole in a piston.

This is a good thread on cost of ownership of a deuce , it is 5 1/2 years old so some costs have increased. cost of ownership (the real cost of a deuce)

You can also use white vinegar. https://www.youtube.com/watch?v=Udn4BrKVlzw

The first thing to do is load test your batteries .

Read through some of the wait times in this thread. EUC time frame chart...need your info... EUC Approval Delays

This has the wiring diagrams CUCV Wiring Diagram color (except M1010)

Check your fusible links. Fusible Links - 101There is more electrical info here CUCV Helpful Threads

There is a M37 with a 283 with a auto for sale on Cleveland CL si it's been done.

JWADE could do what the GL reps that were on the site years ago did and just quit logging on to SS because of the whining. At one point EUC's from GL were taking 6-12 months . Go back and search the GL threads .

Don't all the all HMMWV's coming out of auction have to be trailered or towed according to sales agreement not to drive on public roads ?

Any tire that sat for a extended period of time low on air or flat should be replaced as it will have sidewall damage.

Push rod from the wheel cylinder. GM CUCV Parts and Illustration Catalog 52D Section 5 page 1 of this TM shows the brake parts . part # 32 is what you have there. GM part # 2622667

It is pretty simple to title here in michigan , take your bill of sale and SF-97 form to the Secetary of State office and about $25 you will get it titled.

You can probably find some ideas in these threads. New Old Warn Winch 8274 Install Quick and Easy Winch Mount Winch Mount for stock bumper/brushguard Warn PN64402 or Powerplant on 84 M1009 do you prefer winches form the front or from the rear My M1008 Milemarker Winch Bumper CUCV Winch...