Search results

Re: RE: Cucv and M103 trailer in columbus OH. What did you have for pickup?

Very nice. Thanks for your hard work Mike.

They also have noise arrestors on all the motors to minimize interferance with the radios. The Diff vent on the front is mounted higher. I don't know about the back and how high the vent it mounted. Pintle hitch. Blackouts. No interior overhead light.

I will take measurements when tommarow but I find myself with another m1009 and an m103 genset trailer. I hope to load the cucv in the back and hook up and tow the trailer.

Anyone tried it before?

RE: Re: RE: Transport Two Deuce Engines from Columbus OH to I may be able to convoy with you if you have to go down. I am in the Ann Arbor area.

I just got high bidder on an m1009 and a M103a3 trailer with generators. Would anyone in the local area be able to help me out and get them during the week so I could come down and pick them up on the weekend. Or would anyone be able to store one or the other for me until the weekend? Also...

I have yet to be able to check the junkvee. I got detained this morning. I will check for you tommarow or Saturday at the latest. Chuck

RE: Re: RE: Starter Relay I got to thinking about this. I think it is the same relay used elsewhere in the truck. I think it is the same relay as the horn relay. I will take a look tommarow to confirm this. If this is the case just get a horn relay.

RE: Re: RE: Starter Relay You can also get auto relays from Radioshack. I may have one on my junkvee for you Paul. I will check tomarrow. When I was cutting my dash for my radio I thought I had cut into wires because the starter engaged and was turning the engine over. When I stopped cutting it...

I basically made a post to mount my Jotto Desk mount from my Excursion. I will get picks when I can. I took a long bolt and bent it at 90 degrees then bolted it to the radio bracket. I then used a metal shock bushing sleeve to get the right diameter. The desk clamps to a pole mounted to the...

Mike, I have a mount attached to my radio bracket that I use for my laptop but I would still like to find a project box to enclose them on top of the dashboard. Where do you get your project boxes? Also, what size box did you use? I also need one for the boost and pyro on the deuce. Thanks...

Cancel that Paul. I was just thinking. Do you say it is the same plate as is already on the front of the left head? If it is the same, and I suspect it is, I can take one off my junkvee.

You need small wire hoops that you must attach to the body panels. I don't know where to get them.

Thanks for the input. I hope to get to it in the next couple of weeks. I plan to mount mine on top of the dash board with the wires running up from the speaker hole. I also want o put in an oil pressure gauge so next to the volt meter is out of the question. I also put my backup glow plug...

I need to get off my butt and get a mechanical gauge set in my truck. Running a T for the oil pressure is no problem but I need a good place to put the temp probe for the temp gauge. Is there a good plugged port that goes into a water passage that anyone else knows about or has used? I have yet...

I get around 17.5 with city driving and around 19.5 on the highway. I get the extra knock until the cold run solenoid goes off then it smooths out. I had been driving an excursion but as soon as I got this road ready I drove it everyday. It is now my everyday vehicle.

The new uniforms have IR patches also.

Is there a place to add the second switch or do you have to plum in a T?

What size trailer it that?