• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. A

    The Chrysler 265 & The M37

    Don't forget to install the disc brake kit at the same time... cuz if you think you wanna go 65 ya gotta be able to stop... ACE
  2. A

    Help with 24V Starter

    Don't know what Wilson is, but any good starter/alternator shop will isolate the ground on a civvy alt for about 30 bux...and fix your starter too... ACE
  3. A

    Can I use K1 in a Deuce

    It may run a little hot unless you have the fuel density compensator activated... ACE
  4. A

    Shifter Boots

    The original ones came with a metal ring already mounted to them with rivits... ACE
  5. A

    What is this hole??

    Not enough info for any reasonable sort of guess...for sure.. eight inches from the bottom? Inside, outside, front edge, rear edge.. through or just one side painted after drilling or rusty around hole, etc...Marine Stuff? ACe
  6. A

    Can anyone ID this Plug???

    The three single packard connector tags will be a good clue.. See Dennis Spence's book for the legend... ACE
  7. A

    VIN differences between M1008 and M1028?

    RE: VIN Inside the -10 manual is the spec list.. The big difference in the vins is from the M1009 which is a D1 and the D3 is the Pickup Ambu etc... You usually don't find any info other than the engine in the vin... The vin decoder is in the Civvy Parts book for the CUCV and the...
  8. A

    OK, Who bought my motor?

    Or you can buy a whole running truck for 2 grand... ACE
  9. A

    Pile of Starters

    They are a commercial starter and several varieties wll fit your truck... The Delco Remy ones...with the tin can on the back end are not for the MF, but do fit the 6602. Any truck starter and alt shop can rebuild your Autolite, LeeceNeville or Prestolite 24 volt starter... Just take the...
  10. A

    need seal part numbers

    Ya, the design has only lasted 60 years... must be really bad!! Most leaks are operator error....You have to keep those vents clean.. get into the habit of rotating the top of em and tapping them up and down each time you are under the truck.. Do not overfill the diffs and use single viz GL1...
  11. A

    DANA60 Brake drum bearing?

    Refer to your 34 manual for said truck.. ACE
  12. A

    brake lock on wrecker

    You have a air pak problem, provided your line lock is not engaged...or you have failed to use OHT in your Pak as the LO tells you to.. or your MC plunger is set too long. ACE
  13. A

    Towbar for CUCV moving to Texas.

    RE: towing that is my kind of answer... good job papercu.... ACE
  14. A

    Cab bows for less than $2 apiece

    I just wonder how the troops survived for 30 years without the fore aft upgrade kit...?? ACE
  15. A

    aother Brake light question

    If only one light illuminates, the second must have a bad ground or a bad bulb or a bad connection.. Remember that the early deuces only had one brake light and the updates changed the harness to include a separate bo brake light on the right prior to the use of the composites... so if you have...
  16. A

    Changing Front inner Oil Seal

    remember that your Deuce differentials date from 1949 and that qualifies for "old" ACE
  17. A

    Air tank drain Kits...

    OK... direct email to ACE is rampartsllc#aol.com I do not check here daily especially when I am on r and r as I am now...thanks for all the interest and the PMa...I will start shipping next week as your Money orders arrive.. ACE
  18. A

    Deuce Lights

    Look at the wattage ....check the Mil specs vs the 4863s you have and then of course the pattern might be different for Mil vs civilian... aCE
  19. A

    Wing window

    I have brand new ones for the passenger side.. in the frame and rady to go.....$45 ea plus post and ins... ACE You can order just the glss from any good windshield place... I get the new mirror glasses from windshield world for $7 for example... ACE
  20. A

    Head Gasket

    If you are going to replace the headgasket you might as well adjust the valves and do a carb rebuild at the same time.. It would be prudent to get a valve grind gasket set instead of just a head gasket... ACE
114,103members
167,071threads
2,352,230posts
2,687online users
Top