Search results

Group, He also sold a twin mustang which is currently being restored to flying. Also he gathered the planes form all over, where ever he could find them. There is quite a bit of talk about him on the Warbird forms, and an article several months ago i Air & Space. Laterrrr Avn-Tech

UncleMikey, You get the Stagerwing, I have an overhauled R4360-20 in a can. (also a J-47, in a can). Laterrrrr Avn-Tech

Group, There are 2 Mig-29's (I beleive in Ohio) an F-104 in AZ 4 F-100's in Wy a scatering of T-38 & F-5 around Laterrrrr Avn-Tech

PaperCU, Try going to: Military MEP and Aircraft Gen-Sets - SmokStak It is a bullitin board for people who collect and maintain generators. Someone there may have a copy. I have about 100+ generator manuals, but not the ones you are looking for. Good Luck Avn-Tech

Yohan, I looked at using a weld in bung on my barrel, but instead chose a 2" pipe section (saved 1 part). I cut a hole with my torch about 3- 5" up from the bottom of the barrel, and welded the pipe section in. I chose the 2" pipe, because it let me put in a heating element also (have not used...

73m819, I agree with you, and just spent the last two days searching the internet for manuals for my newest project (M38, willys). I found lots of other MV (tanks, Halftracks, armored cars, ect...) manuals during my search, which have been added to my referance liburary. One of my projects...

blackXJ, You can find the manuals at: M35A2 Service Manuals Enjoy Avn-tech

KSmailes, I have purchased several things from GL (2 ea Deuces, 2 ea generators, 3 ea MKT's). The deuces fired right up (one needed little work) and drove both home. I have not had time to look at the generators yet (MEP-003 & MEP-004). The MKT's came partially filled, but worth what I paid...

SouthDave, I plan on putting a Cummins in it, when I get to that point. Started stripping the frame down today, did not get to far before dark. Probably going to take awhile, since I normally only get to the hanger one day a week. Laterrrrr Avn-Tech

I am an Addict Group, Here are some photos of my HUMVEE Project and Hangers. Enjoy Avn-Tech

Group, Today I traded for a HUMVEE project, about 80% + complete. Some assembly required. Tuesday I am going to look at an M38, and in Jan I will be buying a Pumper (Fire Truck) to also add to my collection of projects. It is not like I do not have enough projects (13 airplanes, deuce, 3...

Group, Did anyone win one of the Deuces for sale at the GSA Auction in OK. I would bid on several, but they were too far away for me to bring home. Laterrrrr Avn-Tech

Group, Shannon Deese, a group member is a Carc Paint dealer. If you can not find him as he rarly visits the form, let me know and I will contact him. Laterrrrr Avn-Tech

Scuffy, As an alternate, I would drill and tap holes in the case to mount to. That way, you and always put a bolt in to stop oil from leaking out. I have a welder (flame spray), that uses a nickle powder and a gas welder to weld cast iron. To start, I always prep, then preheat the item(350...

Group, Here are some more photos of my set up. There are photos of my oil storage tank (500 gal), and the set up. In one photo you can see the tail of my Stinson L-5(currently undergoing restoration), and Fairchild PT-19 (awaiting restoration). Yesterday, I processed 55 gallons more oil...

Scuffy, I have not seen the transmission you are talking about, but all transmissions I have seen so far have a place to bold the transmission mount to. I would not recommend welding on the case (unless you break the case, like happened at our shop installing the trans in a race car this...

Group, So as not to hijack anouther thread, where I posted about my set up, I am starting a new thread. After doing some research, I decided to go with a Dieselcraft OC-50 setup. I purchased a complete setup (Filter and pump), on Ebay for about $800. I also purchased a 500 gal oil storage...

RDUKW, Looks like you are out of room, you may need to move them to my place for storage. I promise to excersize them regulary. Avn-Tech

Area52, Currently I am not heating my oil. I did include a water heater element in my set up, so I would not have to redesign my set up to add one later. What I may do to thin my oil, is mix 20% fuel in with it before I start filtering it. I will post some photos next week, when I get a...

Group, About two months ago, I purchased a Dieselcraft OC-50 centrifuge. This week I finally got some time and set it up. Took two days to assemble it all on a 55 Gal drum, the way I wanted it. Once I got it all assembled, I ran 10 gal of waste oil for approx 1 hr. (centrifuge flows 60 gal...