Search results

Took a spin with cover off trans &transfer case,screech is a better term for the noise ,loud screech,let off gas a little or push it a little harder it quiets down ,is it possable it is the clutch? looking to that next

What Lucas additive are you all using in the tranny and t case? i was wandering if since the 3053a is an overdrive tranny it could be the way the gears mesh together,besides i cant narrow the location of the noise down to the tranny ,planning on replacing the hi-lo shaft seal again on t case as...

New oil to proper level, working great,just havent been in enough deuces to get a feel for all the different sounds they make.

Wandering if this is somewhat normal,in 5th gear(3053a) tranny,like on the interstate 2000 rpm and above its making a howling sound only on the level ,under load like up a grade it doesnt do it,clutch seems to be adjusted correctly engages at the right point and does not slip,checked the...

I upgraded to 1100 tires recently and need a adaptor to recalibrate my speedo for the larger tires,anyone know where they can be had?

Thats a big variation.

What is the going price you could expect to pay for a good working complete winch set up?

Where might one buy a speedo adaptor to correct actual speed with 1100s?

So what difference did the 11.00s make in actual speed campared to 9.00s?how much is the speedo off? is there mod th make the speedo correct again?

Any ideas on why my fuel gauge if at half when tank is full,well about 40 gal anyway,seem i read about this very subject here before but cant find it now.

I had mine apart cleaning it awhile back and wandered the same,i noticed that area was magnatized and the button would stay put on its own ,i think that button simply acts as a bearing of sorts but if the divit in the button bothers you simply flip it to the "new"side,be careful reassembling as...

What could one expect to pay for a good used hub? shipping would be the bad part.

New ones at Clarks are $90.00 ,used would be great.

here's the pic,this hub has three cracks,this one the worst

Im in the process of flipping hubs,brake rebuild ect on my deuce,one of the rear hubs has four cracks about 1'' back from flange face ,all cracks are over the bolt holes that connect axle to hub,each crack is 3/8 to 1/2 in long,no bolt holes are stripped,only thing that makes since is the bolts...

11 Echo, wish i knew,marietta is15 min away,what did you recover if i may ask? seems not many mv around my area.

I was told you didnt need to balance since these trucks arent very fast,am i messing up putting them on without balancing them?

The xzl's look great,none of those were available within driving distance for me,Clark has new Firestone t831's in 1100 but way more price than the xl's.WALLET chose my tires.

Im thinking they should look better than the 900's ,may be a little skinny looking,but cant afford the bigger meats right now,im still in the process of making my truck road worthy and reliable.

Agreed,sure does.